Table of Contents
This guide is about Fix ‘Audio Crackling in Windows 10’ Issue. So read this free guide, Fix ‘Audio Crackling in Windows 10’ Issue step by step. If you have query related to same article you may contact us.
Fix ‘Audio Crackling in Windows 10’ Issue – Guide
Users may encounter Windows 10 audio crackles or Windows 10 audio failure error while playing audio. In general, Windows 10 audio crackle error can be caused due to internal system settings. But in rare cases, a problem with your computer’s sound hardware may be the cause.
In the next section, we’ll show you how to fix Windows 10 audio crackling error. If you are facing the same problem and don’t know how to fix it, read on.
Connect your device back
This is the easiest step to try and may work more often than expected. Sometimes your audio device may not be fully connected and this can cause Windows 10 audio crackling issues. Sometimes driver issues may arise that will resolve themselves by simply disconnecting and reconnecting your audio device.
When reconnecting the audio device, make sure it is fully connected, especially if the device uses an audio jack.
Test your audio equipment on another device
Before we proceed to the next troubleshooting step, it’s a good idea to try out your audio device on another device. Connect your speakers or headphones to a laptop, phoned a replacement computer to test if the problems persist.
If there are still audio crackles, the problem is with the audio device itself. In that case, it may be necessary to inspect the cable for damage. You can try contacting the manufacturer to see if they offer any type of warranty service in case of damage.
Test another headphone port
If you have a Windows 10 PC, you will usually have a headphone jack on the front and back of the PC. You must disconnect the audio device from the headphone jack you are currently using and try the other headphone jack.
The headphone jack might be defective, in which case simply using a different port might solve the problem. If you only have a single headphone jack, you can purchase a USB-to-headphone jack adapter that can solve the Windows 10 audio crackles issue. However, we recommend trying the other troubleshooting steps below. , as this can prevent you from investing in hardware you don’t need.
Update your sound drivers
The next step would be to uninstall your drivers and allow Windows to automatically install the correct drivers again. This can fix potential issues with driver issues and reverse any strange software issues you may have encountered.
To uninstall your sound drivers, first open the Start menu and look for Device Manager. Click on the displayed result.
Once your Windows 10 PC is turned on, it should automatically check and install new drivers for your audio device. If not, unplug and plug in the audio device again to prompt Windows 10 to check for new drivers.
Change audio format
The audio format setting in Windows 10 allows you to control the audio frequency to customize system-wide sound quality. However, some audio devices may have issues if the frequency is set too high. You should lower the frequency of your audio format to see if it solves any audio issues.
To change the audio format, first open the Windows Start menu and look for Control Panel. Open the option that appears.
Test your audio again and see if the audio crackle issue is resolved. If it doesn’t, test each option until you find a setting that solves your problem. If none of the options work, skip to the next troubleshooting tip.
turn off space sound
Windows 10’s spatial sound can distort audio quality. You can just turn it off. So it’s worth trying to see if that solves your problem.
To turn off audio enhancements in Windows 10, first open the Start menu, find Control Panel and look for the Sound option. Then follow the steps below.
Then test your audio again to see if it has stopped crackling. Otherwise, go to the next suggestion below.
Disable exclusive mode
There is a setting in the sound window that allows apps to take exclusive control of your device. This can be useful for virtual sound apps, but when an app is not working properly it can cause problems with the audio.
To fix this problem, open the Sound application again in Control Panel. Once in the sound app, find your active device in the playback area. Then follow the steps below.
Test your sound device again to see if the audio crackle is gone. Otherwise, follow the steps below.
change power settings
It is possible that, in some cases, certain power settings are causing problems with your audio device. This is easy to fix and can be fixed by following the steps below.
Try a new installation
if you finish up still having audio issues and you are sure it is a Windows 10 related software issue, you may consider reinstalling Windows 10. Make sure you have backed up up all your files beforehand. You can download Windows again from Microsoft, but make sure you have your license key handy.
Final note
I hope you like the guide Fix ‘Audio Crackling in Windows 10’ Issue. In case if you have any query regards this article you may ask us. Also, please share your love by sharing this article with your friends.