Fix Error code 1068: Dependency Service Failed to Start

This article will show you how to Fix Error code 1068: Dependency Service Failed to Start. When the dependency service fails to start a group or service, it gives the error code 1068. It could make it impossible for a user to connect to a wireless network or start a firewall service. Before you try to fix the problem, you should restart your computer and see if the problem is still there.

“Error 1068: the dependency service or group failed to start” appears when you try to run Network and Sharing Center or Windows Defender Firewall. This problem could be caused by a number of things. Windows Error 1068 A window service error is The Dependency Service or Group Failed to Start Windows. When a user tries to fix problems with the network services, they get this error. In this error, a computer connects to the internet, but it only gives limited access to the network in both wireless and LAN networks.

This error could be caused by your antivirus software. The antivirus thinks that the Windows service is dangerous, so it stops it from talking to the system. Well, in this guide to fixing errors on Error 1068 Windows. We have put together some troubleshooting Ways that will help you fix Error code 1068: Dependency Service Failed to Start. If you want to know more information about this Visit Official Microsoft Support site.

Update your network adapter driver

No luck so far? The problem is that the driver for your network adapter might be a bit old. In this case, updating it might help. You can manually search the Internet for the latest version that the manufacturer recommends, or you can use Windows Device Manager to do the job for you. Do the following with Device Manager to update your driver:

1. Press the Windows key and the X button at the same time.
2. Device Manager should be chosen from the list.
3. Find the driver for your network adapter.
4. Right-click on it.
5. Select Update driver.
6. Restart your PC for the changes to take effect.

Expand your administrators group

1. Open a command prompt at a higher level: Windows logo key + S -> Enter CMD -> Choose Command Prompt, then right-click on it, and then As Administrator.
2. Type in these commands, making sure to hit Enter after each one:
   • net localservice /add localservice localgroup administrators
   • net localgroup administrators /add networkservice
3. Close the Command Prompt.
4. Start up your computer again and see if your firewall can now work.

Replace nlasvc.dll

Your nlasvc.dll might be broken, so you may need to reinstall it. To use this method to your advantage, you will need another computer, which, of course, must not have any problems. Now, do what’s written below:

1. Start the computer that isn’t having any trouble and go to C:\Windows\System32\nlasvc.dll.
2. Copy the file nlasvc.dll to a USB stick.
3. Put this drive in your computer that’s giving you trouble.
4. Run your command prompt as an administrator and type in the following commands, hitting Enter after each one:
   • /f takeown c:\windows\system32\nlasvc.dll
   • cacls c:\windows\system32\nlasvc.dll /G your_username:F (your_username must be your computer’s username)
5. Then you need to go to C:\Windows\System32\nlasvc.dll.
6. Rename ‘nlasvc.dll’ to ‘nlasvc.dll.old’.
7. Now, copy the file nlasvc.dll from your USB drive to this location.
8. Right-click on nlasvc.dll and choose Properties from the menu.
9. Go to Advanced after opening the Security tab.
10. Owner > Change > Type NT SERVICE\TrustedInstaller Check Names > OK
11. Use ==> OK
12. Restart your PC.

Reset your network adapter

If your Windows Firewall still won’t start, try resetting your network adapter. To reach this goal, do the following:

1. Open your elevated command prompt (see the previous method).
2. Type the following commands, pressing Enter after each one:
   • netsh winsock catalog reset
   • netsh int ip reset reset.log hit
3. Close the cmd window and see if this method worked.

Reset TCP/IP to default

If you still don’t know how to fix “dependency service or group failed to start” on Windows 10, the next step would be to reset your TCP/IP:

1. Open a command prompt with a higher level of access.
2. Type the following commands (without the quotes). Make sure to press Enter at the end of each:
   • “ipconfig /flushdns“
   • “–r“
   • “netsh int ip reset“
   • “reset c:resetlog.txt”
   • “netsh winsock reset“
3. Restart your computer.
4. Try to turn on your Windows Firewall after you restart your computer.
5. If the error code 1068 is still showing, try the next fix.

Turn on your Windows Firewall, using Run

1. Press the Windows logo key and the R key on your keyboard at the same time.
2. Type “services.msc” without the quotation marks and press “Enter.”
3. You’ll see a list of services.
4. Find your Firewall, right-click it, and then: Choose a property.
5. Select Start, then set the type of startup to Automatic.
6. Apply > Click OK > For the changes to take place, you need to restart your computer.
7. Check to see if the problem still exists.

What Is Error 1068?

1. Case 1: When you run Network and Sharing Center, it says “Error 1068: The dependency service or group failed to start.” If you have this problem, you won’t be able to connect to the internet on any network, whether you use an Ethernet cable or just plug your computer into the network.
2. Case 2: Windows Firewall won’t start because of error 1068. When you try to turn on your Windows Defender Firewall, you might see the message “Error 1068: Dependency service failed to start firewall.” Don’t ignore it, because if you turn off Windows Firewall, anyone can get into your computer without your permission.