Table of Contents
This guide is about Fix “Sound Not Working on iPhone” Issue. So read this free guide, Fix “Sound Not Working on iPhone” Issue. If you have query related to same article you may contact us.
Fix “Sound Not Working on iPhone” Issue – Guide
In this article, we’ll show you how to fix the sound on iPhone using some tried and tested methods. This post will help you if you can’t hear sounds during a phone turn on while listening to music or watching movies while playing games, or if you cannot hear any sound. Try all the options below to find which works best for you.
No sound on iPhone: what causes this?
It’s possible that the problem is spread across your entire iPhone, or it’s isolated to a specific app. With proper repair, the specific problem will likely be revealed. To resolve the issue and find out what is causing it, perform these procedures in order.
Fix “sound not working on iPhone” issue
Follow the proven techniques below to fix the volume on iPhone. These steps will apply equally to all iPhone models, including the recent X and 11.
1. CHECK THE QUIET MODE BUTTON
The simplest solution is the most obvious: check the Ring / Silent switch. Your iPhone may be in silent mode. If that’s the case, just flick to the other side to activate high mode. Then make sure the volume is turned up. up pressing the volume buttons (“+” / ”-“) on the side. iPhone has no sound
2. RESTART YOUR IPHONE TO MAKE THE SOUND WORK
It could be some bug that isn’t harmful at all. Restart your iPhone: Press the Power / Sleep / Sleep button and the Home button at the same time. keep holding both buttons until the screen turns off and displays the Apple logo again. The smartphone will restart without affecting personal data. If there is a temporary sound failure on the iPhone, this solution should fix it. No volume on iPhone
3. GO TO THE DEFAULT SETTINGS
This troubleshooting is a little more radical than the previous ones, as you will lose your smartphone’s personalized settings. To return the sound, try resetting your iPhone by reverting it to its default settings. Go to Settings then General and Reset All Settings. This step will not affect your data, contacts or media.
4. TURN HEADPHONES ON AND OFF
It is very common for the iPhone to play music well with just headphones. Once disconnected, there is no sound and the volume slider does not show up. If this is the case, take your headphones and insert them into the headphone jack, then quickly pull them out. Repeat 4 or 5 times. Sometimes the smartphone gets stuck in headset mode, so this action will usually undo it. Also, this can remove any dust or dirt lodged there.
5. CLEAN ANY DEBRIS
Use a brush to carefully clean any debris from the receiver, spokes connector, and speaker mesh. The brush should be clean and dry and have soft bristles. If your gadget is in a case or cape, make sure it doesn’t block the speaker. Also, you can use isopropyl alcohol, acetone or denatured alcohol to remove any extra dirt.
6. TURN THE BLUETOOTH OFF
You may have paired with a nearby Bluetooth headset. Therefore, you cannot hear sound without this device. Turn off Bluetooth (choose Settings > General > Bluetooth) to unpair with a headset.
Alternatively, just turn off Bluetooth on the lock screen.
7. RESTORE AN OLD VERSION WITH SPEAKERS WORKING
If you’ve backed up a fully functioning iPhone system, you can go back to it. Please note that all images, media and contacts added after the backup will be removed. Go to Settings > iCloud. Choose Storage and Backup and choose up the backup you want to restore. Alternatively, you can restore a copy of iPhone through iTunes.
8. TOUCH THE LOWER RIGHT CORNER
This solution is a little strange, but it worked successfully for some people. You need to pinch the lower right corner of the iPhone above where the speaker is. Hold this grip for about 20 seconds. The connector might be loose, so this action will reposition it correctly.
9. ADJUST THE VOLUME DURING THE GAME
It sometimes helps to have the sound back on the iPhone in apps. Find and open any app or game that has music or sound effects. Adjust volume with volume buttons or the slider in Control Center on the lock screen. Adjust volume with volume buttons or the slider in Control Center
10. UPDATE YOUR IOS TO RECOVER SOUND
Update your device to the latest version of iOS. Go to Settings > General > Software Update and make sure your iOS version is the latest. Otherwise, proceed with the update.
Final note
I hope you like the guide Fix “Sound Not Working on iPhone” Issue. In case if you have any query regards this article you may ask us. Also, please share your love by sharing this article with your friends.