The Best Gateway for Tech Trends

Copyright 2023 @compsmag - All Right Reserved
Blogs

Guide: Install Linux on your PC

by Tech Desk
by Tech Desk

This guide is about Guide: Install Linux on your PC. So read this free guide, Guide: Install Linux on your PC step by step. If you have query related to same article you may contact us.

Guide: Install Linux on your PC – Guide

You’re considering Linux as a replacement operating system, but there’s a problem: you don’t know how to install it. Switching to Linux can be quite simple. Choose a Linux operating system (OS), burn the installation media, relax and wait. But as easy as it is, there are some complications. Here it is how to install Linux on your PC with minimal fuss.

A note about the target device: you can use a desktop or laptop computer to run Linux. Some versions of Linux are particularly well suited for older hardware, such as laptops and low-cost netbooks. If you plan to do this, take the time to research your computer model to find the best Linux operating system for it. As a general rule of thumb, when choosing a Linux distribution, first make sure it will work with the hardware you plan to install it on.

How to Install Linux on Windows 10

  • Linux is a family of open source operating systems. They are based on the Linux kernel and can be downloaded for free. They can be installed on a Mac or Windows computer. Here it is how to install Linux on a Windows 10 PC.
  • If you want to boot both Linux and Windows twice, you will need to make room for your Linux operating system to live. To do this you will have to partition your main hard drive. Here it is how to do it:

    • How to Partitioning a Hard Drive in Windows 10

  • Open the Windows search bar. This is the magnifying glass icon in the lower left corner of the screen.
  • Then type “DISKMGMT.MSC” into the search bar and press Enter.
  • Right-click on the main hard drive and select Shrink Volume. If you have more than one drive, be sure to choose the one that says Primary Partition. This will usually be labeled the C: drive.
  • Then choose how much you want to reduce your unit. It is recommended that you set aside at least 20 GB (20,000 MB) for Linux.
  • Finally, click on Shrink.

    • How to Make a bootable USB from Linux

  • Download a Linux distribution in ISO format. An ISO file is a disk image. Some of the top options are Ubuntu, Mint or Fedora. They can be downloaded for free from the main website of each distribution. For this article, we are using Ubuntu.
  • Insert the USB drive into your computer. You may be asked to format your drive. This will erase all data stored on your drive, so be sure to go back up your files before you start.
  • Download Rufus. You can find the latest version of the app here.
  • Open Rufus and select your USB drive from the device list. If you don’t know which drive to use, eject all other drives until you have only one to choose from.
  • Under Startup selection, click Select button and choose the ISO file you downloaded earlier. Do not change the other default settings.
  • Finally, click Start. If you get a pop-up message asking you to select a mode you want to use to burn the image, choose ISO.

    • How to Install Linux from USB

  • Insert a bootable Linux USB drive.
  • Click on the start menu. this is the button in the lower left corner of the screen that looks like the Windows logo.
  • Then hold down the SHIFT key while clicking Restart. This will take you to the Windows Recovery Environment.
  • Then select Use a device.
  • Find your device in the list. If you don’t see your drive, choose EFI USB Device and choose your drive on the next screen.
  • Your computer will now boot to Linux. If your computer restarts Windows, there was a problem with the drive or you might need to change your BIOS settings.
  • Select Install Linux. Some distros also let you try the operating system before installing it here.
  • Go through the installation process. This will be different depending on which distro you are trying to install. These details can include your WiFi network, language, time zone, keyboard layout, etc. You may also need to create an account with a username and password. Make sure you write down all the details as you will likely need them in the future.
  • Most distros allow you to partition your disk or erase it and do a clean install during installation.
  • Restart your computer when prompted. If you have more than one operating system on your system, you will be taken to a GNU GRUB screen after reboot. This screen allows you to select the operating system you want to boot.

    • Final note

    I hope you like the guide Guide: Install Linux on your PC. In case if you have any query regards this article you may ask us. Also, please share your love by sharing this article with your friends.

    You Might Be Interested In
    Best of BestBlogs DailyComputer GuidesComputers Tips and TutorialsguiderobertGuides and Tutorialsguiding12How To GuideHow To GuidesLaptops Guideslaptops TipsLinux GuidesTipsTricksWindows 10
    Tech Desk

    Our editorial team manages this account. We provide Quality technical hacks and guides, Consumer Electronics comparisons, How-To tips, and tutorials with the latest updates.

    Leave a Comment

    * By using this form you agree with the storage and handling of your data by this website.

    You may also like

    How to Fix “Discord Error Code 1006” issue on Windows 11/10

    How to Fix “Helldivers 2 Quickplay Not Working” issue

    How to Fix “Helldivers 2 login limit reached” issue

    How to Fix “TikTok Picture Swipe Not Working” issue

    How to Fix “Network Adapter Error Code 31” issue on Windows 11/10

    How to Fix “Location Is Not Available” issue in Windows 11/10

    Where technology meets possibility" "Compsmag has Proudly Shared Free Information Since 2014.

    This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More