Table of Contents
Error 0x80071AC3: When backing up data from your computer to an external drive, you might encounter this message. The volume is dirty, so the operation could not be finished. Please try again after running chkdsk. External drives, including USB flash drives, SD cards, memory cards, external hard drives, and others, consistently experience this problem. You won’t be able to cut, copy, delete, or edit files on the external drive as a result of this problem. In other words, you cannot access the drive.
The error message for error code 0x80071AC3 states that the volume (the disc that Windows is attempting to read from or write to) is dirty and as a result Windows was unable to complete the requested operation. Bad sectors on the disc in question or a feature like ReadyBoost that prevents Windows from reading or writing to the disc in question are just two possible causes of this issue.
Fortunately, there are a lot of things you can try to do to try and get rid of error code 0x80071AC3 and have Windows successfully read or write to the affected disc as long as the affected data storage disc is not dying or dead. Therefore, eliminating the error 0x80071AC3 the volume is dirty should be your top priority. In this article, we list a few potential remedies for fixing error code 0x80071AC3.
How to Fix Error 0X80071AC3 ‘Volume is Dirty’
Disable ReadyBoost
ReadyBoost is a Windows built-in feature for caching data on a USB device to improve system performance. Once this feature is enabled, Windows is prevented from reading or writing from the hard drive, resulting in “Error 0x80071AC3”. To resolve “Error 0x80071AC3”, try disabling the ReadyBoost feature by following these steps
Modify Registry settings
Sometimes, due to error code 0x80071AC3, the system does not allow you to copy the files to the hard disk because your computer’s registry is configured to disallow writing to drives in general or to the drive where this problem occurs. Follow these steps to make sure that writing to drives is allowed in your computer’s registry.
Format the drive
Re-install drivers by using Device Manager
Use the chkdsk utility to fix bad sectors
If you see the “Disk is dirty” error message, you can try running the chkdsk command, which will help you clean up your USB drive if there are bad sectors on it. Chkdsk will examine the disk space and generate a status report. The full name of CHKDSK is check disk. It is designed to check the hard disk for errors and then fix them.
What causes 0x80071AC3 Error?
When attempting to transfer files to a flash drive, SD card, or other external storage device, many users ran into this problem. Numerous Windows operating systems frequently experience this issue, which can happen for a number of different reasons. In some cases, the disk’s bad sectors are to blame. On the other hand, a feature that prevents the system from accessing the disc could be to blame for the error. You don’t need to worry too much because there are several ways to fix the problem as long as the affected storage device is not dead. The error message “the operation could not be completed because the volume is dirty” must be removed.
Final Words
That’s it with our article on How to Fix Error 0X80071AC3 ‘Volume is Dirty’. you can visit Microsoft support center for further help. Windows error 0x80071ac3 is not related to the hardware of the computer; instead, it refers to dirty bits. The processor in a computer needs to be able to determine whether each block of memory has been altered, stored, or needs to be deleted. The CPU utilizes the dirty bit to complete this task.