How To Fix Network Adapter Errors In Windows 10

181

This tip is about the how To Fix Network Adapter Errors In Windows 10. So read this free guide, How To Fix Network Adapter Errors In Windows 10 step by step. If you have query related to same article you may contact us.

How To Fix Network Adapter Errors In Windows 10 – Guide

Nobody appreciates when the internet stops working on their PC out of nowhere. Unfortunately, many of us face the problem due to malicious network adapter. The network adapter disappears from Device Manager or you receive a notification that the network adapter is missing. As the adapter is missing, you cannot connect to the Internet.

The reasons for this could be many, but the most obvious is any recent software playing around with it. It is entirely possible for malware to disrupt your computer, which is the worst case scenario. Do not worry. Once the network adapter is back, you can use the Internet without any problems. But for that you need to solve the network adapter problem first.

How to Fix Network Adapter Errors in Windows 10

Restart and check connections

Try some quick fixes like restarting your PC or laptop and check if you can now find the network adapter. Also, if you plugged in an Ethernet cable, unplug it and plug it in again.

Show hidden drivers in Windows 10

The network adapter may be missing simply because Device Manager does not display it. Here’s How to make the network adapter visible:

Right-click Start > Device Manager.

Open the View menu and click Show Hidden Devices.

Expand the list of network adapters and verify that the adapter is now visible.

If the adapter is still missing, click Action > Check for Hardware Changes.

Remove the battery from your Laptop

If you use a PC, or your laptop does not have a removable battery, skip this solution. By removing the battery, you force the motherboard to reset its settings, which may be enough to fix your problem. if your laptop comes with a removable battery, turn it off and take out the battery for a few seconds. Then put it back and turn on your laptop.

Disable antivirus and VPN

If you are using a VPN on your device, try disabling it or even uninstalling it. Then restart your laptop or PC and check for a difference. Also, disable your antivirus or check for available updates.

Run the network adapter troubleshooter

Windows 10 provides a helpful list of troubleshooters, so it’s no surprise that you can fix a number of network adapter issues using one of these tools. Follow these steps to run the network adapter troubleshooter:

Right-click Start and select Settings or use the keyboard shortcut Win + I.

Go to Update & Security > Troubleshoot > Additional Troubleshooters.

Under Find and Fix Other Problems, select Network Adapter > Run Troubleshooter.

Follow the displayed instruction.

Use the Network Reset Tool

If the troubleshooter did not resolve the issue, you can try a network reset. This will reset all network settings to their default settings without interfering with your data. Follow these steps to reset your network:

Open Settings and go to Network & internet.

Select Status and scroll down to Network Reset.

Select Reset Now.

Network reset in Windows 10

Check your power management settings

If you are using a laptop, Windows 10 will turn off some of your features when the battery is low or when the battery saver mode is activated. Follow these steps to verify power management settings:

Right-click Start > Device Manager.

Expand the list of network adapters.

Right-click the network adapter and select Properties.

Open the Power Management tab.

Uncheck Allow the computer to turn off this device to save power.

Click Apply > OK to save your changes.

Reset Winsock Settings

Winsock is a programming interface and support program that determines how Windows networking software uses its network services. If something goes wrong with the Winsocks files, it could result in your Windows 10 network adapter disappearing. Here it is how to reset Winsock data:

In the Start menu search bar, search for command prompt and select Run as administrator.

In the command prompt window, type netsh winsock reset. Then press Enter.

Restart your PC or laptop to save the changes.

Final note

I hope you like the guide How To Fix Network Adapter Errors In Windows 10. In case if you have any query regards this article you may ask us. Also, please share your love by sharing this article with your friends.