Table of Contents
This tip is about the how to Fix No Device Drivers Were Found. So read this free guide, How to Fix No Device Drivers Were Found step by step. If you have query related to same article you may contact us.
How to Fix No Device Drivers Were Found – Guide
This guide will remember six distinct methods to fix Windows 11 error, no device drivers were traced. As the latest OS cycle has been delivered in a stable state and the vast majority of bugs have been resolved, a number of users are anticipating a chance on their PCs. As such, there are three distinct methodologies by which you can perform the update from the Settings menu, through the Media Creation Tool, or using an ISO document. While the primary strategy goes through everyone according to plan, the second and third techniques are causing a lot of problems.
How to Fix No Device Driver Found
Switch to a USB 2.0 port
If you connected the USB installation media from which you want to install the new operating system to a USB 3.0 on your computer, try unplugging it and plugging it into a 2.0 port. This is a weird fix but it has helped a lot of users and this is definitely the easiest thing for you to check and take care of. Proceed with other solutions if this one doesn’t work.
Set partition as active
Setting the partition you want to install Windows on as Active has also helped in countless cases where users were about to give up. This needs to be accomplished through the recovery tools that appear as an option before choosing to install Windows.
diskpart select disk X list partition select partition X
active
Create a new disk
If the reason for this error is simply that the drivers were not successfully written, or if the disk or USB device has suffered some damage in the meantime, then there is no other option but to try to write another copy of the operating system. The important thing is that you keep your serial key as it can only be used once. Here are the complete instructions on how to create a Windows 10 installation DVD or USB:
Enable xHCI transfer option in BIOS
This option is quite debatable and there are some representations of what exactly does this. However, the most accepted answer is that when Disabled it allows the BIOS to manage USB devices and ports and when Enabled it allows the OS to manage this. There are many people who claim that enabling this option solved their problem right away. This is also recommended for newer operating systems such as Windows 10 or Windows 8.
Change everything to legacy and set boot device to your DVD or USB
Configuring certain settings to support Legacy has proved successful in many cases and sometimes your computer will try to boot from the hard drive first bypassing the inserted Windows installation media which results in bad device reads. That’s why you’ll need to evaluate the set of steps below to resolve the issue.
if you are not sure how to boot from the installation media, you need to know exactly which option to select when the boot menu opens. It will ask which device you want to boot your computer from. Follow the instructions below to easily boot from your storage device.
Final note
I hope you like the guide How to Fix No Device Drivers Were Found. In case if you have any query regards this article you may ask us. Also, please share your love by sharing this article with your friends.