Table of Contents
You are excited to run a PS4 update when new system software is released. But a PS4-style error could appear during the updating process. SU-42118-6. You will see a black screen with the PS4 error code when this problem occurs. A mistake has happened. SU-42118-6. If you encounter this PS4 system software update error SU-42118-6, you will obviously be unable to update your PS4. You might run into various error codes while using your PS4, including SU-41333-4, E-8210604A, CE-43461-8, SU-42118-6, and more. Some of these errors are caused by software issues, while others are not.
The SU-42118-6 PS4 system software update error is not a software problem. We think that a lot of users have run into this problem. The majority of the time, this problem will cause your PS4 to repeatedly restart itself without a system update. Why does this problem exist? When the ribbon connector between your motherboard and BD-ROM is damaged, it always occurs. For instance, you can see this PS4 SU-42118-6 error when you disassemble the PS4 console, perhaps to clean it. As of right now, you should be aware that improper PS4 hardware assembly is the root cause of error SU-42118-6. Your PS4 may also abruptly shut off due to this. Your PS4 will be unable to connect to the BD-ROM when this problem occurs. As a result, your PS4 cannot be successfully updated.
Ways to Fix PS4 Error SU-42118-6
Verify the Connected HDMI Cables
Sometimes, HDMI cables that are connected to a device can give you this error. In the event that the error problem persists despite applying the aforementioned fixes, a damaged or broken HDMI cable may be to blame. So, it would be wise to check HDMI cables. Take a quick look at your HDMI cables and follow the steps below:
Restart Your PS4
As was already mentioned, a software bug may be to blame for the occurrence of this error on your PS4. Thus, you can restart your PS4 to fix the issue. The restart will give your PS4 a brand-new start, resolving any minor software issues. In order to restart your PS4, follow the instructions below:
Perform Power Cycle on Your PS4
Power cycling your PS4 is an alternative option if your ribbon is connected correctly and is in good condition. Make sure all of your power is disconnected during the power cycle. So, for this, adhere to the instructions below:
Check the Ribbon Connection
The ribbon connection being damaged, broken, or loose is another factor contributing to this error. This error may appear on your PS4 if the ribbon connecting the Blu-ray drive and console is damaged or improperly connected. As a result, you can easily resolve the error problem by switching out the damaged ribbon for a new one. Or, if it’s discovered to be disconnected or improperly connected, try reconnecting it tightly to prevent receiving such errors.
Restore Your PS4 Default Settings
You can also attempt to fix PS4 SU-42118-6 by going back to the system’s default settings. This reset the PS4 to its default settings and removed all customizations that might be incompatible with the most recent software update and causing the error. It worked for several users. You must do this by adhering to the mentioned rules below:
Update Your System Software
Most often, out-of-date system software is to blame for this kind of error. Therefore, having fully updated system software is always advised. You must first connect your PS4 to the internet in order to check for system software updates. The steps listed below should be followed to check for system software updates:
Initialize the PS4 system in Safe Mode
The PS4 console’s entire system settings should be reset if none of the previously mentioned fix’s work for you. This is equivalent to returning the console to its original factory settings and initializing all system settings. You’ll need a FAT-formatted external USB flash drive with enough storage to hold the PS4 data in order to accomplish this.
Final Words
So here we conclude our article on how to Fix PS4 Error SU-42118-6. One of the more challenging error codes in the history of the PlayStation 4 is SU-42118-6. Many believe that this error denotes a serious hardware issue that necessitates opening the console and possibly even performing repairs. This is due to the fact that SU-42118-6 may indicate that the hard drive or blu-ray drive is not being detected by the console as a result of a broken BD-ROM ribbon connection.
Some users who experienced SU-42118-6 on and off may have a broken or damaged ribbon connector for the blu-ray drive, or it could be a randomly occurring error brought on by a software flaw. In either of these scenarios, you might need to replace the BD-ROM ribbon connection or the entire hard disc drive assembly in order to resolve the SU-42118-6 error on the PS4. For further information regarding this error, you can also visit official PS4 website.