Table of Contents
This tip is about the how To Fix ‘Wi-Fi Internet is Not Working’ Issue. So read this free guide, How To Fix ‘Wi-Fi Internet is Not Working’ Issue step by step. If you have query related to same article you may contact us.
How To Fix ‘Wi-Fi Internet is Not Working’ Issue – Guide
When you get Wi-Fi connection but no Internet access error, it’s usually a disconcerting and unpleasant experience. It could be a problem with the router or operating system settings. We’ve seen this “lack of internet on Wi-Fi connected problem” a lot over the years, so we put it up. up a step by step tutorial to help you fix it.
If the Internet is not working on all devices on the network, it is likely that the router / modem is not working properly. You can also inspect the ADSL cable to determine if it is kinked or damaged.
If the Internet is not working on a single device, it is likely that the device’s WiFi adapter is defective, making it difficult for the device to communicate with the router. Here are nine procedures to resolve connected Wi-Fi but no Internet issues.
Fix Wi-Fi connected but no Internet access error
1. Restart the device
I know what it looks like and chances are most of you have done it a few times, but if you haven’t, then you should.
Good old reboot forces network devices to update their IP tables and reload configuration files. Turn off your router and modem (if you have one). Then wait 30 seconds before restarting them again. In addition, you should also restart your PC to ensure everything is clean. Once all devices have restarted, try connecting again to see if it works.
2. Check the modem lights
There may be a problem with your Internet connection rather than the connected devices. To confirm, check the WAN light on the router and make sure it is blinking. Make sure the WAN light is not constantly on or completely off. Ideally, the DSL lights should be ON or green in some cases, and the Wi-Fi indicator lights should blink. if you are not sure how to check, contact your ISP customer service and confirm the ongoing Internet problem. Ask how long it will take to fix the problem.
3. ISP is down
Visit your Downdetector mobile data and look for your ISP. Let’s say it’s AT&T. You can search for the most popular ISP here and see if their servers are down or if they are experiencing an outage. This handy site tracks worldwide coverage so you can also check it based on your location.
Click the Live Outage option to find out if it’s down in your part of the world. A simple search of social media sites like Twitter can also help you understand if other users are experiencing similar issues when Wi-Fi is connected but there is no internet.
4. Antivirus or other security application
Antivirus software is known to cause Internet problems in the past. Disable your antivirus and other security applications like malware temporarily and check if it resolves Wi-Fi connected but no Internet errors. If so, do you know where to look next. If not, continue with the next step.
At this point, I also recommend that you run a full or full Antivirus and Malwarebytes scan to make sure you are not infected with something dangerous that is causing this error.
5. Use the built-in troubleshooter
If the internet is good on the ISP side and is working on at least one of the connected devices, there is likely a problem with the Wi-Fi adapter. This can be easily fixed with the built-in troubleshooter that comes with Windows and Macs .
Right click on the network icon in the taskbar and select ‘Troubleshoot’. Windows will automatically look for network problems and fix them. If it can’t fix it, it will at least let you know what the problem is. You can search for the solution online.
6. Release DNS
Sometimes DNS cache conflict can lead to a Wi-Fi connection but no Internet access error. You can free DNS to ensure it’s not causing problems. Go to Windows Start menu and type ‘cmd’ to open Command Prompt and run it with admin rights. Type the following command and press Enter to release DNS.
Here are some more command prompt commands that can help resolve Wi-Fi and other network error issues.
Reset files stored by Windows to access the internet:
netsh winsock reset netsh int ip reset
Release your old IP address and set a new one automatically.
ipconfig / ipconfig release / renew
If that doesn’t work, give the following commands one at a time, but one after the other.
ipconfig / flushdns nbtstat -R nbtstat -RR netsh int ip reset c:resetlog.txt netsh winsock reset
7. Change wireless mode on router
This is an exceptional case and only happens if you have an old Wi-Fi card or device installed. If you are gaining Internet access on your PC by connecting to the router via an Ethernet cable, then there is likely a communication barrier between these two devices. And one way to fix this is to change the wireless mode. There are several wireless modes on a router. For example, you might have seen something like – 802.11 b or 802.11 b / g or 802.11 b / g / n, etc. These b, g, n and ac are different wireless patterns. Typically, wireless mode is set to 802.11 b / g / n / and works well for most users. Sometimes older devices like smartphones do not support this mode and result in network issues.
Log into the router’s dashboard and look for the ‘Wireless Mode’ option. It should be in the wireless settings, where you set the Wi-Fi SSID and password. Select 802.11 b from the drop-down menu next to Wireless Mode and save your changes. Restart Wi-Fi and see if this fixes the problem. If that doesn’t work, try 802.11g. Check again if Wi-Fi is connected, but no Internet access errors were resolved or not.
8. Get IP and DNS automatically
Can you connect the same computer / smartphone to another Wi-Fi network? Try using a mobile access point to check. It could be a DNS or IP address conflict. Another way to verify this is to ping the router from the command line. If you get a timeout response or destination host unreachable, it is likely an IP address conflict.
Open the command prompt with administrator rights and give this command:
ping 192.168.1.1
Ideally, configure the network settings to automatically obtain the IP address and DNS settings of the router to ensure minimal conflicts. However, sometimes assigning a static IP address to your devices or changing the DNS server helps to fix connected Wi-Fi but no Internet access errors.
Following are steps to change IP settings in Windows. If you are running macOS or Android, see our article on how to change DNS on all platforms and how to assign static IP addresses on all platforms.
On Windows, we need to change the network adapter settings to get an IP address automatically. To do this, click on the Start menu and find Network and Sharing Center.
When the network window opens, click Change adapter options.
In the Network Connections window, right-click your current or Wi-Fi network adapter and choose Properties.
Select Internet Protocol version 4 (TCP / IPv4) and click Properties in the pop-up window.
Select Obtain an IP address automatically and Obtain DNS server address automatically here and click OK to save the changes.
You should connect automatically, and if not, try restarting the PC to start using IP address auto-configuration.
9. Fix network driver issues
Sometimes a corrupted network driver can cause Internet problems. Press Window + R keys and type ‘devmgmt.msc’ to open Device Manager.
Expand Network Adapters and find your wireless network adapter. Regardless of the brand you own, it must have the suffix ‘Wireless Network Adapter’. Right click on the network adapter and click on the ‘Update Drivers’ option.
You will see two options now. You can update the driver manually or automatically (online). Try connecting your PC to the router using an Ethernet cable. If there is no problem with the router or Internet connection, you should be connected perfectly. Once connected, click “Search automatically for updated driver software” and Windows will automatically find and install the correct driver.
If you are unable to connect, you will have to manually download the latest driver from the manufacturer’s website onto another device connected to the Internet and move it to your PC. Once you have the latest driver, use the “Browse my computer for driver software” option to manually install the driver software.
Final note
I hope you like the guide How To Fix ‘Wi-Fi Internet is Not Working’ Issue. In case if you have any query regards this article you may ask us. Also, please share your love by sharing this article with your friends.