Table of Contents
This tip is about the how to Fix Wi-Fi is Not Connecting After Sleep in Windows 10. So read this free guide, How to Fix Wi-Fi is Not Connecting After Sleep in Windows 10 step by step. If you have query related to same article you may contact us.
How to Fix Wi-Fi is Not Connecting After Sleep in Windows 10 – Guide
Windows 10 users are complaining about an issue they are experiencing with WiFi on their Windows 10 devices. Users say they are unable to connect to WiFi when the computer wakes up up of sleep. If you are also experiencing the same type of problem, then you don’t need to panic. Follow the steps below and the problem will be solved very easily. But, before making any changes to your computer, you should consider following these initial solutions first to see if they provide any simpler help with your problem.
Does sleep mode disconnect the network connection? Fix with these solutions
Change power management settings
One of the most common causes of this issue is the wrong power management plan. You should make sure the wireless network adapter is not set to turn off to save power when computers go into sleep mode.
If your current power management plan turns off your wireless adapter during sleep mode, just change it and your issue will be resolved. You can check if this is the case and change your current power management plan in Device Manager. Do this, follow these instructions:
- Press the Windows logo key and the X key together and choose Device Manager.
- Expand Network Adapters, right-click the adapter, and click Properties.
- Click the Power Management tab and clear the Allow computer to turn off this device to save power check box.
Uncheck the IPv6 box
If the wrong power management plan is not an issue, you may have some issues with the IPv6 protocol. To disable it, you must perform some operations on your Network and Sharing Center. To uncheck the IPv6 box, follow these steps:
- Go to Network and Sharing Center.
- Click Change adapter settings (in the left pane).
- Right click on the connection you are using. Click Properties.
- Now remove the IPv6 tag and click OK to save the changes.
Use the network troubleshooter
If Windows disconnects from Wi-Fi after hibernating, you may be able to fix this issue with this simple workaround. According to users, just run the network troubleshooter by following these steps:
- Right click on the network icon in the lower right corner. Choose Troubleshoot from the menu.
- The network troubleshooter will start and try to fix your problem.
- After the troubleshooter completes, check to see if the issue still appears. Many users have reported that this solution has worked for them, so please feel free to try it out. It should be noted that this may not be a permanent solution, so you will have to repeat it whenever the problem arises.
Change your power settings
According to users, Windows sometimes disconnects from Wi-Fi after sleeping due to power settings. Users have reported that they have fixed the issue by simply following these steps:
- Press the Windows key + I to open the Settings app.
- When the Settings app opens, navigate to the System section.
- In the left pane, navigate to the Power and Suspend section. Scroll all the way down and check both boxes in the Wi-Fi section.
Once you’ve done that, your Wi-Fi issues should be completely resolved.
Disable Broadcom Bluetooth
If Windows disconnects from Wi-Fi after hibernating, the problem could be the Bluetooth adapter. It appears that Broadcom Bluetooth automatically starts with Windows, causing this issue. To fix this problem, you can do the following:
- Press Ctrl + Shift + Esc to open Task Manager.
- When Task Manager opens, go to the Startup tab and find the Bluetooth service. Right click and choose Disable from the menu.
If you cannot find the Bluetooth service on the Startup tab, you can disable it by doing the following:
- Press Windows key + R and type msconfig. Press Enter or click OK.
- Navigate to the Services tab and click Hide All Microsoft Services. Find the Bluetooth service and disable it. Now click Apply and OK to save your changes.
After making the necessary changes, you need to restart your PC to apply them. Keep in mind that disabling the Bluetooth service may not be the best solution if you use Bluetooth devices frequently. To use your Bluetooth devices again, you will have to enable the disabled services.
Disable your antivirus
According to users, if Windows disconnects from Wi-Fi after sleeping, the problem could be related to their third-party antivirus software or firewall. To fix this issue, it is advisable to disable any third-party antivirus or firewall software and see if this resolves the issue.
If disabling your antivirus software or firewall does not resolve the issue, you may need to uninstall your antivirus software completely. To do this, it is advisable to use a dedicated removal tool to remove all files associated with your antivirus software.
After removing your antivirus and firewall, check if the problem still appears. If the issue is resolved, you may need to reinstall your antivirus again or switch to a different antivirus solution. If you’re looking for a new antivirus that won’t interfere with your system, you can try Bitdefender.
Make sure Ethernet is disabled
If Windows disconnects from Wi-Fi after sleeping, the problem could be the Ethernet connection. One of the quickest ways to fix this problem is to make sure your Ethernet connection is disabled. This is quite simple and you can do this by following these steps:
- Open Network and Sharing Center and navigate to Change adapter settings.
- Locate your Ethernet connection, right click and choose Disable from the menu.
After disabling your Ethernet connection, check if the issue is resolved. Furthermore, you can also accomplish this solution by simply disconnecting the Ethernet cable from the PC.
Change your connection to private
Sometimes this issue can occur because your network connection is set to Public. Public network connections use a different set of rules and this can sometimes cause certain problems to occur. If Windows disconnects from Wi-Fi after hibernating, you can fix this by doing the following:
- Click your Wi-Fi icon in the lower right corner and click Properties.
- Now find the Make this PC discoverable section and enable it.
After enabling this option, your connection will automatically switch to Private, fixing any Wi-Fi issues.
Disable require login
According to users, sometimes Wi-Fi problems can be caused by their settings. By default, Windows will ask you for your password as soon as you wake up. up your PC.
This is a security measure, but many users have reported that this is feature is causing Windows to disconnect from Wi-Fi. To resolve this issue, you just need to disable this feature following these steps:
- Open the Settings app and go to the Accounts section.
- Select Login Options from the menu on the left. In the right pane, in the Require Login section, select Never.
After changing this setting, your PC will not require you to login after waking up up from sleep mode. disabling it feature may be a small security concern, but it should help you with this issue.
Perform a system restore
If you are still having this problem, you may be able to fix it by running System Restore. To do this, follow these steps:
- Press Windows key + S and enter system restore. Now choose Create a restore point from the list.
- The System Properties window should appear. Click on System Restore
- When the System Restore window opens, click Next button to continue.
- Check Show more restore points if available. Now you need to select the desired restore point and click Next.
- Follow the onscreen instructions to complete the process.
Once your PC is restored, check if the issue is resolved.
Final note
I hope you like the guide How to Fix Wi-Fi is Not Connecting After Sleep in Windows 10. In case if you have any query regards this article you may ask us. Also, please share your love by sharing this article with your friends.