How to Fix ‘Windows 10 Won’t Boot’ Issue

This tip is about the how to Fix ‘Windows 10 Won’t Boot’ Issue. So read this free guide, How to Fix ‘Windows 10 Won’t Boot’ Issue step by step. If you have query related to same article you may contact us.

How to Fix ‘Windows 10 Won’t Boot’ Issue – Guide

From time to time, you may experience a situation where Windows 10 will not boot after upgrading. This can be annoying if not noticed. how to fix, however, to reinstall Windows 10 directly. In this article, we should help you fix the Windows 10 will not boot problem.

Probable Causes ​​Windows 10 Will Not Boot

There can be several reasons why Windows 10 will not boot. So out of all of them, here are some of the root causes of the error:

So these are some of the causes that can harm your device. Therefore, be aware of these cases before solving the problem.

Troubleshooting methods for Windows 10 won’t start Up

Here are a number of fixes that can get you out of technical glitches. So follow the guide properly

Examine Windows Safe Mode

Running the computer in Windows safe mode often resolves Windows 10 startup issues. Basically, it runs the computer with minimal software running. Also, it can avoid all software and driver problems. Therefore, to run the system in Safe Mode, there are two processes. Below is the description of the processes:

It is very common that, although there is a problem with booting, most systems crash up and cannot operate the Windows splash screen. However, the process can change entirely if the boot process is interrupted three times in a row, causing the computer to forcibly run in safe mode. Under Choose an option within the recovery window, open the Troubleshoot option. Finally, open the startup settings and from here you can promptly restart your computer in Safe Mode.

It may be necessary to create the Windows 10 USB recovery drive when you cannot enter safe mode. Basically, the recovery drive includes the Windows 10 recovery conditions. However, this one feature is eliminated by Microsoft. So if you’re creating a recovery drive, you should be well aware of the fact that you’re getting an extra Windows 10 computer and a storage capacity of at least 512MB. To perform the task, follow the step below.

Originate and launch the Control Panel and click the Create a recovery drive option. And follow all the rules according to the guide.

Check the battery

Startup issues usually occur due to battery issues. However, if your device is experiencing battery issues, you can try an alternative charger cable. Before purchasing a new cable, be sure and verify that it works on other systems. Also, close the device to the power supply by removing the battery from the system.

You can find out if there is a hardware issue by removing the battery. If necessary, you should replace important parts such as battery, charging cable, etc.

Unplug all USB devices

Conflict with a USB device can also be one of the main causes that can restrict your computer from starting. Therefore, this kind of problem can be solved by unplugging the USB devices. If the loading screen issue still appears on the system screen, it is recommended to remove all USB devices. Also, be sure to turn off the device before disconnecting USB devices.

Turn off Fast Boot

In the new operating system, there are settings that are usually present in BIOS or UEFI and are called Fast Boot. Basically this helps to boot quickly by loading drivers. The advantage of having a Fast Boot is that you can easily turn it on or off with the help of the BIOS.

According to in-depth research, tapping the Delete key helps trigger the POSt environment. There are also two other keys that can work in these cases. They are the Escape key and the F2 key. Once you enter BIOS or UEFI, the Fast Boot option becomes part of the advanced options.

Try a malware scan

Sometimes, by neglecting nature, people tend to leave large malware that sometimes interrupts startup. The easiest and possible way is to have an anti-malware program that can boot all parts of the system.

This will help remove all malware and can help the startup process to proceed successfully. If the problem exists, go to the next step.

Boot to the command prompt interface

Booting the device using the Command Prompt Interface sometimes resolves boot issues. in order to proceed up with the process, make sure you have Windows 10 with a bootable disk or USB drive. Also, have another computer that will help you get going. up with the process.

start the system up to boot the device using the command prompt. Stay intact and discover a key combination during startup. This will help to easily enter the BIOS. Now make the USB drive or DVD the first bootable device by navigating the Boot tab. Radically consult the onscreen instructions.

Restart the system by inserting the disk or drive containing Windows 10 and save all settings. Now, just enter your preferred language, currency and input preferences. On the next screen, select the option Repair your computer. Now open the Troubleshooter and enter the Command Prompt option. You will get a window to get started up with the commands.

Use System Restore or Startup Repair

Some utilities are worth using, so using System Restore or Startup Repair is quite useful. On the Advanced Options screen, look for links to Startup Repair or System Restore.

Basically, System Restore is a utility that allows users to go back to a previous restore point. This can eliminate the technical concerns of Windows 10 not booting.

factory reset

Right now, we’re advancing deeper into more stubborn and destructive repair options. In addition to other resets, such as a factory reset, the most critical part is updating and restoring your computer. To do this enter into the factory setting application and proceed up with the procedures. Please be aware that certain apps will be deleted. But it can solve the problem of Windows 10 not starting up.

Avoid Windows 10 bootloader

If you run into obstacles having a fresh install of Windows 10, the new version of Bootloader Monopoly can sometimes help. To reach an existing operating system installation, it may cause certain interference. However, there are a few ways to eradicate the problem. To carry out the process, open the Command Prompt and type

“Bcdedit / set {default} bootmenupolicy legacy”

After typing, restart your computer and find out if the legacy boot loader has been replaced by Windows 10. If there is a problem, go to the next part.

Reassign drive letter

There are certain cases where a system with one or more drives causes this type of Windows 10 boot issue. Also, sometimes unassigning the drive letter can also cause the issue. By booting from the command prompt interface, the problem can be resolved. Have a disk partition and follow all processes.

To reassign the correct letter, use select and assign a letter. I hope this process helps to resolve the problem of Windows 10 not booting.

Final note

I hope you like the guide How to Fix ‘Windows 10 Won’t Boot’ Issue. In case if you have any query regards this article you may ask us. Also, please share your love by sharing this article with your friends.