How to Fix Windows BCD error code 0xc0000098

A lot of people use computers to do their daily work, and even the smallest problem can be frustrating, especially if it happens when the computer is starting up. You can’t always tell when a Windows error is going to happen, and when it does, you’ll need to be ready to deal with it. One of the most common Windows errors that can stop your device from starting up is a BCD error. This needs to be fixed right away. We will talk about the Windows error code 0xc0000098 today.

Your PC/device needs to be fixed, says the error message. The information in the Boot Configuration data doesn’t make sense for an operating system. File: BCD. Error Code: 0xc0000098. Boot Configuration Data (BCD) is a part of your Windows device that helps it start up. If the BCD is missing or broken, you won’t be able to use your computer or hard drive, and you might get stuck on the loading screen. There are many things that can cause a BCD error, but the most common ones are a broken hard disc drive or the wrong way a programme was installed.

Ways to Fix Windows BCD error code 0xc0000098

Check Boot Configuration Integrity

1. Open the command prompt (see Method II).
2. type the following commands and press Enter after entering each command

Run a CHKDSK Scan

1. In the Windows Setup window, click Next.
2. Click Repair Computer in the lower left corner.
3. On the Select Option screen, select Troubleshoot.
4. On the Advanced Options screen, select Command Prompt.
5. In the Command Prompt window, type chkdsk C: /f /r /x and press Enter.
6. Close the command prompt and click Next.

Startup Repair

1. Start your PC from your setup disc (USB/DVD/CD).
2. Select Repair Computer and go to Troubleshooting > Advanced Options > Startup Repair.
3. Startup Repair will begin scanning your installation for known problems and attempt a repair if it finds any.
4. If this fails, you can run the startup repair again.

Perform a clean install of Windows

1. Boot from your installation media and select Next.
2. Select Install Now > Select the I accept > Next check box > Select Custom: Install Windows Only (Advanced).
3. If multiple disks are displayed, you only need to delete all partitions on the disk where you want to install Windows.
4. Highlight each drive/partition in the list and select Delete. When the Windows Setup message appears, select OK.
5. Perform this procedure for every drive in the list except the one that has unallocated space on it. When you are done, only drive 0 Unallocated Space should be left.
6. Select Next.
7. The Windows setup screen will prompt you to select your language/keyboard layout, remove the external storage drive from your device, and select OK. This will reboot your device.
8. Your device should now be working properly.

Rebuild the BCD manually

1. Boot from the Windows installation disc.
2. Click Repair Computer after selecting the correct language, time and keyboard input.
3. Select the Windows installation drive, usually C:, and click Next.
4. Select Command Prompt when the System Recovery Options box appears
5. Type the following command and then press the Enter key
6. When the program finds a Windows installation and asks if it should add it to the boot list, press Y

Run the SFC scan

1. Open the command prompt as in the first method above.
2. Type this command sfc /scannow /offbootdir=C: /offwindir=C:Windows and press Enter to start the scan.
3. If your Windows is installed on a different drive, replace C: with the letter of the drive where you installed your Windows 11. However, C: is usually the default for most users. So if you are unsure about the letter of your drive, just leave it at C:.
4. When the SFC check is complete, exit the command prompt and select Continue to restart.

Uninstall the Recent Updates

1. Press Win + R to open the Run dialog box.
2. Type control in the text box of Run and click Enter.
3. Then click Uninstall a program in the Programs section of the Control Panel.
4. On the left side of the screen, click View installed updates.
5. Select the recently installed update by right–clicking it.
6. Select Uninstall from the context menu and follow the on-screen instructions.
7. Restart your computer and check if the problem occurs again.

What Is the Windows Error Code 0xc0000098

To help you understand the Windows 11 error code 0xc0000098 better, let’s start by going over some basic terms that you may come across as you try to fix this error. First, there’s Boot Configuration Data, or BCD. The BCD is an important part of starting up because it has all the information needed to load the operating system. Windows won’t be able to load the operating system once it is broken or gone. In this case, you might see the file BCD error code 0xc0000098 or just 0xc0000098 on Windows 10/11.

Some users say they got the 0xc0000098 BCD error after they upgraded their Windows OS or made a copy of it. When this error shows up, Windows won’t start up. Most of the time, this error code comes with the message “Your PC/Device needs to be repaired. There is no valid OS entry in the Windows Boot Configuration Data file. File name: BootBCD. Error code: 0xc0000098.”

Final Words

So here we conclude our article on How to Fix Windows BCD error code 0xc0000098. you can visit Microsoft support center for further help. The Windows error code 0xc0000098 happens when the BCD (Boot Configuration Data) doesn’t have any relevant files. For example, if the file is replaced with a system file like winload.exe, ntoskrnl.exe, aswVmm.sys, Ntfs.sys, etc., your computer will show surface error code 0xc0000098.