How to Fix Xbox One ‘Black Screen Of Death’ Error

252

In November 2013, Microsoft unveiled the Xbox One as the Xbox 360’s replacement. The Xbox One became well-known due to its improved user interface and excellent performance (possibly as a result of the switch from PowerPC to AMD). The AMD custom APU (a CPU and GPU combined on one die) used in the original Xbox One had a clock speed of 1.75 GHz. It also has 7.1 Surround Sound with Dolby Atmos, DTS: X, 8GB DDR3 Memory, and support for 720p and 1080p displays.

Microsoft released two additional models following the success of the Xbox One: the Xbox series S in 2016 and the Xbox One X in 2017. The Xbox One S kept the same APU, but it also supported HDR10, 1440p, and 4K display resolutions. The Xbox One S and Xbox One X both supported UHD Blu-ray playback, while the original Xbox One only supported regular Blu-ray discs. The Xbox One’s controller was excellent at delivering the controller experience, which is a crucial component of the overall gaming console experience. This time, Microsoft redesigned the Xbox Controller.

Ways to Fix Xbox One ‘Black Screen Of Death’ Error

Check all your connections

Verify that your gaming console and television are both turned on. Make sure your television is set to receive the proper input signal (HDMI)

Verify that the HDMI cable is inserted into the “out to TV” port on the console.

One of your television’s additional HDMI ports should accept the HDMI cable.

To connect your game console to your TV, use a different HDMI cable. (If appropriate)

Verify the security of the HDMI cable connections on your gaming console and television.

Connect your Xbox One to an alternative TV. (If appropriate)

Disable 24 Hz for Blu-Ray playback

Once you see the black screen, press the Xbox button on your controller to enter the guide menu.

From the side menu that just appeared, access Profile & System and from the next menu that just appeared, select Settings.

Once you are in the Settings menu, open the General tab and then go to the TV and Display Options menu.

From the next menu, select Video Modes and uncheck Allow 24 Hz in the settings menu.

After you have made this setting, restart your PC and check if the problem is solved at the next startup.

Power Cycle the Console

Turn on the console

Press the Xbox button and quickly go to Profile & System

Go to Settings

Go to System

Go to Console Info

Select Reset Console

Factory Reset the Xbox With the Troubleshooter

Turn off the console

Unplug the power cord from the wall outlet for 30 seconds, then plug it back in.

Press and hold the Pair and Eject button. As you already know, this could be the Pair and Xbox button on the controller (Xbox Series S and Xbox One S All-Digital Edition).

Press and hold the buttons for 15 seconds until you hear a second beep.

The console will switch to the Startup Troubleshooter.

Restart the AVR component

Turn on your TV, wait for it to display a picture, and then turn on the AVR.

Once the AVR is on, turn on your console.

To change your AVR’s input source away from the console and back again, use the input button on the TV’s remote control (for example, HDMI1 to HDMI2 and then back to HDMI1).

Restart the AV.

Set up your TV connection to HDMI by pressing the Xbox button to open the Guide menu

Go to Profile & System > Settings > General > TV & Display Options and select Video Fidelity & Overscan.

Under the Display drop-down menu that just appeared, select HDMI.

Reset the Resolution Settings

Switch the console off.

Unplug the HDMI cable and its power.

Unplug your TV’s HDMI cable.

30 seconds should pass.

Back each cable up.

Hold down the console’s power button for ten seconds. The Xbox should then be turned back. Both the cold boot and the console’s cache are cleared.

Factory Reset the Xbox From the Console

Turn on the console

Press the Xbox button and quickly go to Profile & System

Go to Settings

Go to System

Go to Console Info

Select Reset Console

What is Black Screen Of Death

The term “Blue Screen of Death” is well-known in the system, and the Xbox also has a similar term, “Black Screen of Death,” which serves the same purpose as BSoD by shielding the system from an attack. One of the trickiest errors Xbox users encounter is the Xbox one black screen error. There are many potential causes for this error because there is no single known cause.

The most frequent cause of a black screen of death on your computer is a bug. video Games have a variety of bugs that get better with use. Xbox entered black screen mode to prevent any potential system fallout that the bug might have performed.

Hardware Configuration: Users occasionally purchase hardware regardless of whether it is even compatible with their devices, so if the hardware configurations do not match the Xbox configurations, an Xbox black screen of death error may occur.

Console Dashboard: Several users have stated that they encounter Xbox screen black issues when they attempt to load their dashboard in the system; therefore, in such circumstances, you must contact the professionals or technicians.

Faulty Updates: Several users have reported that their Xbox updates caused the Xbox one black screen of death as a result of some updates and system file problems.

Final Words

So here we conclude our article on How to Fix Xbox One ‘Black Screen Of Death’ Error. The Xbox One gaming consoles’ Black Screen issue can be attributed to a number of factors. One of the simplest explanations was the user’s TV’s improper setup. It may seem silly. However, this is a real explanation for the Xbox One black screen. However, a software update was the real cause, especially for Xbox Insider Program members. According to reports, Microsoft released the software update without thoroughly testing it, leaving users staring at a blank TV screen. A software flaw in the Xbox Dashboard’s user interface was another cause of the Xbox One Black Screen of Death. Some users claimed that the Xbox Live service being down was the cause of the Black Screen. Visit their official website for more information.