Table of Contents
This tip is about the how to Install Windows 10 by Using a USB Drive. So read this free guide, How to Install Windows 10 by Using a USB Drive step by step. If you have query related to same article you may contact us.
How to Install Windows 10 by Using a USB Drive – Guide
Previously, installing Windows required writing the files to a CD or DVD. Installing Windows 10 is no longer difficult. All you need is a USB flash drive and another computer with an Internet connection.
System requirements for installing Windows 10
Microsoft’s system requirements for Windows 10 are quite flexible – you don’t need a powerful computer to get it up and running.
When in doubt, here are the minimum system requirements you will need:
You should also note that although Windows 10 is free to install, you will need to pay for an activation key to unlock all your features after putting it running.
How to install Windows 10
To prepare the Windows installation files, you will need a Windows computer that is already set up. up and connected to the internet. Once that’s done, you’ll move them to the new computer.
Preparing your installation files
1. Insert your 8GB or larger USB drive. It does not need to be blank, but note that any content on the drive will be erased during setup.
2. Open the Windows 10 download site in a browser. There, go to the option “Create Windows 10 installation media” and click on “Download tool now”.
3. After downloading the software to your computer, run it and accept the license agreement.
4. On the “What do you want to do” page, click “Create installation media for another PC” and click “Next” (unless you are planning to reinstall Windows on this same computer).
5. On the next page, you can customize the Windows 10 installation settings. If you don’t want the defaults, uncheck the “Use recommended options for this PC” checkbox and choose the language, edition and architecture you want . When finished, click “Next”.
6. On the “Choose which media to use” page, choose to burn the image to a “USB flash drive”. Click “Next”.
7. Windows should automatically find the USB drive and select it. If you have more than one inserted in your PC, choose the correct one and click “Next”.
8. The installation files will be copied to the USB flash drive. This will take a while. When finished, take the USB drive and insert it into the computer where you want to install Windows.
installing the files
1. You will need to change the boot order for the PC to recognize the USB drive. Start the computer and press the correct key to launch UEFI or BIOS controls at startup – this is usually done by pressing F1, F2, Escape or Delete when starting.
2. When the boot menu appears, find the “boot” control menu and make sure your computer is configured to boot from USB. Then save the UEFI / BIOS and exit.
3. When the computer restarts, it should boot from the USB drive and automatically start the Windows 10 installation program. Now you can just follow the instructions to install Windows on your PC.
4. You will need a license key to complete Windows 10 setup, but you don’t actually need it to get Windows up and running. If you don’t have a key yet, you can defer entering the key until the files are installed.
Meanwhile, Windows 10 will run in a limited state. Any features will be disabled, but the operating system is still usable. This will give you time to buy a Windows 10 key.
Final note
I hope you like the guide How to Install Windows 10 by Using a USB Drive. In case if you have any query regards this article you may ask us. Also, please share your love by sharing this article with your friends.