The Best Gateway for Tech Trends

Copyright 2023 @compsmag - All Right Reserved
Blogs

How to Reset An iPhone When Locked Out

by Tech Desk
by Tech Desk

This tip is about the how to Reset An iPhone When Locked Out. So read this free guide, How to Reset An iPhone When Locked Out step by step. If you have query related to same article you may contact us.

How to Reset An iPhone When Locked Out – Guide

You want to protect the information you have on your iPhone, so you set a password on the device. As with all passwords, it should be easy for you to remember and difficult for others to guess. iPhone passwords are 6 digits long and you must have an assigned one to use some of your phonede features.

Ways to restore a locked iPhone to its original configuration

If you don’t mind erasing your iPhone, use one of the methods below to reset a locked iPhone to factory defaults.

Factory reset locked on iPhone without iTunes

  • The most direct way to unlock iPhone when you forget your password is to use an iPhone unlock tool such as EaseUS MobiUnlock. With this tool, you can reset a locked iPhone without iTunes and don’t need to put the iPhone into recovery mode.
  • Whether you’re using an iPhone 7, iPhone 8, or iPhone XR, you can apply software to reset your locked iPhone to factory defaults.
  • To reset your locked iPhone to factory settings without iTunes:
  • Connect your iPhone, iPad or iPod to your computer with a USB cable and open EaseUS MobiUnlock. Click “Start” button.
  • Select the iOS firmware suitable for your device and click “Download Firmware”. Or you can also click “Select” at the bottom of the window to select existing available firmware if you have previously downloaded one.
  • After downloading the firmware, click “Verify Firmware” to continue.
  • Then click on “Unlock”. In a new warning window, enter the required information in the box and click “Unlock” again.
  • Wait for the unlocking process to complete. Then your iPhone or iPad will be erased and brought back to its original settings.

    • Factory reset locked on iPhone using iTunes

  • If you don’t want to apply third-party software to get into your locked iPhone, iTunes is one of the options to erase your iPhone, including password. To reset locked iPhone using iTunes, you need to first enter recovery mode. The steps for entering recovery mode vary depending on the iPhone you use.
  • Make sure iPhone is not connected to the computer and turn off the device.
  • Enter recovery mode.
  • For iPhone 8/8 Plus and later: Connect your iPhone to your computer while holding the side button. keep holding the button until you see the recovery mode screen.
  • On iPhone 7/7 Plus: Connect your iOS device to your computer while keeping the Volume down button. keep holding the button until the recovery mode screen appears.
  • On an iPhone prior to iPhone 7: Connect the iPhone to the computer while holding the Home button. Keep holding until you see the recovery mode screen.
  • iTunes will automatically launch on your computer. Click “Restore” to restore your iOS and remove iPhone data.
  • To define up your iPhone.
  • if you supported up your iPhone before, you can restore your iPhone from your iTunes or iCloud backup during the setup process.

    • Erase locked iPhone via iCloud

  • If you’ve enabled Find My iPhone on your locked iPhone, there’s one more way to reset your iPhone to factory defaults when you forget your password, and that is to use iCloud.
  • To unlock an iPhone without a password:
  • On your computer, go to iCloud.com and log in with the Apple ID and password you use on iPhone.
  • Choose “Find iPhone” from the options.
  • Click on “All Devices” and select the locked iPhone.
  • Choose “Erase iPhone” to restore locked iPhone factory settings without iTunes.

    • Final note

    I hope you like the guide How to Reset An iPhone When Locked Out. In case if you have any query regards this article you may ask us. Also, please share your love by sharing this article with your friends.

    You Might Be Interested In
    Apple GuidesBlogs DailyguiderobertGuides and Tutorialsguiding12How To GuideHow To Guidesios Guidesiphones guidesSoftware tips and tutorialsTipsTricks
    Tech Desk

    Our editorial team manages this account. We provide Quality technical hacks and guides, Consumer Electronics comparisons, How-To tips, and tutorials with the latest updates.

    Leave a Comment

    * By using this form you agree with the storage and handling of your data by this website.

    You may also like

    How to Fix “Discord Error Code 1006” issue on Windows 11/10

    How to Fix “Helldivers 2 Quickplay Not Working” issue

    How to Fix “Helldivers 2 login limit reached” issue

    How to Fix “TikTok Picture Swipe Not Working” issue

    How to Fix “Network Adapter Error Code 31” issue on Windows 11/10

    How to Fix “Location Is Not Available” issue in Windows 11/10

    Where technology meets possibility" "Compsmag has Proudly Shared Free Information Since 2014.

    This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More