The Best Gateway for Tech Trends

Copyright 2023 @compsmag - All Right Reserved
Blogs

How to Turn On Wake on LAN on Windows 11

by Tech Desk
by Tech Desk

This tip is about the how to Turn On Wake on LAN on Windows 11. So read this free guide, How to Turn On Wake on LAN on Windows 11 step by step. If you have query related to same article you may contact us.

How to Turn On Wake on LAN on Windows 11 – Guide

Wake On LAN is a feature which allows you to configure your PC to boot from a low power state. This is filled in like the remote power of a PC. button. You can use this feature to get your PC’s registries and applications while decreasing power usage when your PC is not being used. This feature (WoL) can even be used to wake up your Windows 11 PC from around the house via the Internet.

How to Configure Wake On LAN in Windows 11

If you do not know how to wake up remotely up your Windows 11 PC with Wake On LAN feature, this article will help you. let’s go over how to enable and turn on Wake On LAN feature, as how to configure and use to wake up remotely up your PC with Windows 11.

Enable Wake On LAN in Windows 11

First, you will have to enable Wake On LAN feature. You can enable Wake On LAN in the BIOS menu. To enable Wake On LAN on your Windows 11 PC, please follow the steps below-

  • Press Windows + I to open your PC settings.
  • In settings, go to the Windows Update section on the left sidebar.
  • Click on recovery in the Windows update section.
  • Here you will find advanced startups. Click restart now button next to the advanced boot option.
  • Your PC will restart. On the next screen that opens up, select Troubleshoot. Then select the advanced options and then select the UEFI Firmware settings option.
  • Select the Restart option and you will be taken to the BIOS.
  • In the BIOS, go to the power settings section.
  • Here you will find the Wake On LAN option; enable it.

    • If your PC does not have an Ethernet port, it will not support Wake On LAN. However, you can get a USB A 3.0 to RJ45 Gigabit Ethernet LAN adapter to give your PC Wake On LAN functionality.

    Configuring Wake On LAN

    Next, you will have to configure Wake On LAN feature on your PC. To set it up, follow the steps provided below-

  • From the start menu, find the control panel and open it.
  • In Control Panel, go to the Network and Internet section.
  • Now click on the network and on the sharing center and open it.
  • In the left sidebar, click change adapter settings.
  • This will show all networks you have connected to.
  • Now select the active network adapter and right click on it. Click on the properties option.
  • In the properties of the network adapter, click configure button.
  • Now click on the advanced tab and select wake on the magic packet.
  • Now on the right sidebar you will see a dropdown of values. From here, select enabled.
  • Then select wake on magic pattern and activate it. Although this step is optional, you can do it.
  • Now select WOL and Shutdown Link Speed ​​and set the value to 10 MBps.
  • Then go to the power management tab.
  • Here, check the option to allow the device to wake up the computer and then check the option Only allow a magic package to wake up the computer.
  • Once this is done, click on the OK button. button.

    • This is How to configure Wake On LAN feature. However, if you don’t want to use it, you can disable wake on the magic packet as you did earlier.

    Waking up Up PC with Windows 11 remotely

    Now that you’ve enabled the Wake On LAN feature and set it up, let’s discuss How to enable it remotely up Windows 10 PC. Follow the steps below to activate remotely up PC with Windows 10.

  • Download the NirSoft application and install it on your PC.
  • After installing the application on your PC, open it and click the Play button button to discover all devices on the network.
  • Now right click on the remote computer. Select Wake Up Selected computers option.
  • Now click on the yes button. That’s it, and you’ve completed the process.
  • Now the tool will start sending the magic packet to wake-up device.

    • Final note

    I hope you like the guide How to Turn On Wake on LAN on Windows 11. In case if you have any query regards this article you may ask us. Also, please share your love by sharing this article with your friends.

    You Might Be Interested In
    Blogs DailyComputer GuidesguiderobertGuides and Tutorialsguiding12How To GuideHow To Guidesinternet tips and tutorialsTipsTricksWindows 10Windows 11
    Tech Desk

    Our editorial team manages this account. We provide Quality technical hacks and guides, Consumer Electronics comparisons, How-To tips, and tutorials with the latest updates.

    Leave a Comment

    * By using this form you agree with the storage and handling of your data by this website.

    You may also like

    How to Fix “Discord Error Code 1006” issue on Windows 11/10

    How to Fix “Helldivers 2 Quickplay Not Working” issue

    How to Fix “Helldivers 2 login limit reached” issue

    How to Fix “TikTok Picture Swipe Not Working” issue

    How to Fix “Network Adapter Error Code 31” issue on Windows 11/10

    How to Fix “Location Is Not Available” issue in Windows 11/10

    Where technology meets possibility" "Compsmag has Proudly Shared Free Information Since 2014.

    This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More