How to Fix ‘Windows 10 Network Adapter Missing’ Issue

How to Fix ‘Windows 10 Network Adapter Missing’ Issue

This guide is about How to Fix ‘Windows 10 Network Adapter Missing’ Issue. So read this free guide, How to Fix ‘Windows 10 Network Adapter Missing’ Issue. If you have query related to same article you may contact us.

How to Fix ‘Windows 10 Network Adapter Missing’ Issue – Guide

If you don’t see Wireless Adapters in Network Connections, or a Network Adapters tab in Device Manager, then your network adapter appears to be missing or not recognized in Windows 10, which is a serious problem as you won’t be able to access the internet until the problem is resolved. In short, when you click the wireless icon in the system tray, it doesn’t list a device to connect to the Internet, and when you open Device Manager, you don’t see the Network Adapters tab.

A network adapter is a very important device in network connection; It can help you send and receive data over a wired and wireless network. It can be seen as the interface between a computer and a network. I recently found that the Windows 10 network adapter problem was bothering a lot of people, so I want to talk about it.

Restart and check connections

Try some quick fixes like restarting your PC or laptop and check if you can now find the network adapter. Also, if you connected an Ethernet cable, you must unplug it and plug it in again.

Show hidden drivers in Windows 10

The network adapter may be missing simply because Device Manager does not display it. Here’s how you can make the network adapter visible:

  • Right click on Start > Device Manager.
  • Open the View menu and click Show hidden devices.
  • Expand the list of network adapters and verify that the adapter is now visible.
  • If the adapter is still missing, click Action > Scan for hardware changes.
  • Remove the battery from your Laptop

    If you use a PC, or yours laptop it has no removable battery, ignore this solution. By removing the battery, you force the motherboard to soft reset the settings, which might be enough to solve the problem. if your laptop Comes with detachable battery, turn it off and remove the battery for a few seconds. Then put it back and turn on your laptop.

    Turn off antivirus and VPN

    If you are using VPN on your device, try turning it off or even uninstalling it. so restart your laptop or PC and check for a difference. Also, turn off your antivirus or check for available updates.

    Run the network adapter troubleshooter

    Windows 10 provides a helpful list of troubleshooters, so it’s no surprise that you can fix many network adapter issues using one of these tools. Follow these steps to run the network adapter troubleshooter:

  • Right click on Start and select Settings or use the keyboard shortcut Win + I.
  • Go to Update & Security > Troubleshoot > Additional Troubleshooters.
  • Under Find and fix other problems, select Network adapter > Run the troubleshooter.
  • Follow the instructions displayed.
  • Use the network reset tool

    If the troubleshooter did not resolve the issue, you can try network reset. This will reset all network settings to default settings without interfering with your data. Follow these steps to reset your network:

  • Open Settings and go to Network and Internet.
  • Select Status and scroll down to Reset Network.
  • Select Reset Now.
  • Check power management settings

    If you are using a laptop, Windows 10 will shut down some of its features when the battery is low or when the battery saver mode is activated. Follow these steps to check your power management settings:

  • Right click on Start > Device Manager.
  • Expand the list of network adapters.
  • Right click on the network adapter and select Properties.
  • Open the Power Management tab.
  • Uncheck Allow computer to turn off this device to save power.
  • Click Apply > OK to save changes.
  • Reset Winsock Settings

    Winsock is a programming interface and support program that determines how Windows networking software uses its networking services. If something goes wrong with the Winsocks files, it can result in the Windows 10 network adapter disappearing. Here it is how to reset Winsock data:

  • In the Start menu search bar, search for the command prompt and select Run as administrator.
  • In the command prompt window, type netsh winsock reset. Then press Enter.
  • Restart your PC or laptop to save the changes.
  • To clean Up network devices

    If the previous method didn’t work, you can follow these steps to clean up. up network devices using the command prompt:

  • Press Win + R to open the Run window.
  • In the Run window, type cmd and press Ctrl + Shift + Enter to run Command Prompt as an administrator.
  • At the Command Prompt, type netcfg -d.
  • Restart your device and check if you can discover the network adapter.
  • Check Windows 10 Background Services

    Your network driver might be missing because a background service has stopped working correctly. Follow these steps to manage it manually:

  • In the Start menu search bar, search for services and select Best Match.
  • From the Services menu, locate and open WWAN AutoConfig.
  • Check that the service status is Running. Otherwise, click Start to get started.
  • Set the startup type to automatic.
  • Click Apply > OK to save changes.
  • Restart your device and check if the missing driver is already available.
  • Final note

    I hope you like the guide How to Fix ‘Windows 10 Network Adapter Missing’ Issue. In case if you have any query regards this article you may ask us. Also, please share your love by sharing this article with your friends.

    We will be happy to hear your thoughts

        Leave a reply

        How to Guides, Best Lists, Top 10 and Tech News - Compsmag
        Logo