Table of Contents
This tip is about the how to Fix ‘MacBook Pro/Air Doesn’t Turn On’ Issue. So read this free guide, How to Fix ‘MacBook Pro/Air Doesn’t Turn On’ Issue step by step. If you have query related to same article you may contact us.
How to Fix ‘MacBook Pro/Air Doesn’t Turn On’ Issue – Guide
If you’ve ever used a Windows computer for comparison, you know that Macs are generally much more reliable and rarely let you down. But with technology, the inevitable happens: computers age, internal storage wears out, battery life gets shorter and shorter. So if you wake up up one day but your Mac won’t turn on, it can feel like your life has stopped thinking about all those lost work in progress, photos, documents, etc. If your MacBook Air or MacBook Pro won’t turn on, it’s very rare that the problem is related to the entire setup – it’s more likely that one of the components is misbehaving, which can range from your screen to software glitches.
Our task here is to find out what is causing the problem. Nothing causes that sinking feeling like you have to pull out up your MacBook Pro and nothing happens. It usually occurs when you have a lot to study, a deadline approaching, or an important email to send. Aren’t these scenarios when things like this happen? Of course they are. Apple devices are known to be very reliable. Regardless of reputation, every device has problems at one point or another.
Fix ‘MacBook Pro/Air won’t turn on’ issue
Make sure you have power
Make sure your Mac is connected to a power source. Try changing the charger or power cord or using a different outlet. The charger itself may be damaged. If you are using a MacBook and its battery is completely drained, you may need to wait a few moments after plugging it in before turning it on. It won’t necessarily start up immediately the moment you plug it in.
Check Hardware
Assuming you are using a Mac desktop, make sure all cables are properly seated. For example, if it’s a Mac Mini, make sure the video-out cable is securely connected to the Mac Mini itself and the display. Try reseating all cables – unplug them and plug them back in – to ensure they are securely connected.
If you recently opened up your Mac and messed with its hardware, this could have caused the problem. For example, if you’ve installed RAM or replaced a hard drive, you can try swapping back old hardware or just making sure those components are securely seated in your Mac.
Run a power cycle
If your Mac is stuck in a frozen state and is not responding to power button presses, you can fix it by cutting the power and forcing it to restart. On a modern MacBook without a removable battery, press the Power button button and hold it for ten seconds. If your Mac is running, this will force the power cut and force it to restart.
With Mac desktops (iMac, Mac Mini, or Mac Pro), unplug the power cord, leave it unplugged for ten seconds, then plug it in again. unplug it, remove the battery, wait ten seconds and reinsert it.
Reset System Management Controller Firmware
In some cases, you may need to reset the System Management Controller (SMC) firmware on your Mac. This is the last thing you should try if your Mac is not responding to power button press on everything. On current MacBooks without a removable battery, plug in the power cord. Press the Shift+Control+Option keys on the left side of the keyboard and the Power button, and keep them all pressed. release all four buttons at the same time and then press the Power button button to turn on the Mac.
Mac desktops do not have batteries, so unplug the Mac’s power cord and leave it unplugged for fifteen seconds. Plug it back in, wait another five seconds and press the Power button button to turn the Mac back on. With older MacBooks with a removable battery, disconnect your Mac from the power source and remove the battery. press the power button and hold it for five seconds. Release the Power button, reinsert the battery, plug in the Mac and press the Power button button to turn it back on.
Use Recovery Mode Disk Utility
Assuming Your Mac Is Actually Booting Up up but macOS is not loading properly, there is probably a software issue. Your Mac’s disks may be corrupted and you can fix this in recovery mode.
To access recovery mode, boot your Mac up. Press and hold Command + R keys during the bootup process. You should try to press them immediately after hearing the buzzer sound. Your Mac should boot into recovery mode. If it doesn’t, you probably didn’t press the keys long enough – restart your Mac and try again.
Click on “Disk Utility” option, click on First Aid tab and try to repair your Mac disk. Disk Utility performs an “fsck” (file system check) operation, so you don’t need to run the fsck command manually.
Restore from recovery mode
If Disk Utility didn’t work, you can reinstall macOS on your Mac. Use the “Reinstall macOS” option in Recovery Mode to have your Mac automatically download the latest macOS installation files and reinstall the operating system. You can also restore from a Time Machine backup. If your Mac operating system is damaged, this will replace the damaged software with a new, undamaged operating system.
If nothing here worked – if your Mac just won’t turn on, no matter how many times you press the Power button, if recovery mode isn’t functional or if macOS doesn’t load properly even after reinstalling it from Recovery Mode, your Mac likely has a hardware problem.
Final note
I hope you like the guide How to Fix ‘MacBook Pro/Air Doesn’t Turn On’ Issue. In case if you have any query regards this article you may ask us. Also, please share your love by sharing this article with your friends.