The Best Gateway for Tech Trends

Copyright 2023 @compsmag - All Right Reserved
Blogs

Fix ‘0x80042405 error’ issue when using Windows 10 PC Media Creation Tool

by Tech Desk
by Tech Desk

This guide is about Fix ‘0x80042405 error’ issue when using Windows 10 PC Media Creation Tool. So read this free guide, Fix ‘0x80042405 error’ issue when using Windows 10 PC Media Creation Tool step by step. If you have query related to same article you may contact us.

Fix ‘0x80042405 error’ issue when using Windows 10 PC Media Creation Tool – Guide

The Windows 10 Media Creation Tool is a useful utility, especially useful when your Windows operating system is having problems and does not start successfully. It allows users to do a fresh install of Windows 10, upgrade to the new version of Windows 10, or fix some startup issues.

However, some users have reported that they encountered error code 0x80042405-0xa001a when running the Media Creation Tool, which prevents them from creating a bootable USB drive with this tool. If you are having problems with the same problem, don’t panic. This article will show you the top 7 methods to fix Windows 10 media creation tool error 0x80042405-0xa001a.

Download the media creation tool directly to your USB

Users have reported that a simple solution to the error is to simply place the media creation tool directly on the USB drive you want to use as a bootable device. For simplicity, when downloading the tool, you must select the USB you will use to install Windows 10.

Typically, you would download this tool to somewhere on your local hard drive, such as your C: drive, and then launch the application. By following this method, you will be sure that all necessary files are intact on the pen drive.

  • Download the relevant version of the Windows 10 Media Creation Tool from www.microsoft.com/software-download/windows10
  • Choose the version in which you will run the tool. Select a 32-bit or 64-bit system and download the file.
  • When choosing where to save the file, navigate to This PC → and select the USB stick. The drive letter for this will be the next letter that comes after the last local hard drive.
  • After the download is complete, open File Explorer and go to This PC → USB Drive. From here, run the media creation tool and follow the onscreen instructions.

    • Format your USB as NTFS

    It is possible that your USB stick is currently formatted as a FAT32 device. This can result in a known media creation tool bug where error 0x80042405-0xA001A appears. The easiest solution is to simply format your USB in NTFS format.

  • Open File Explorer (Ctrl + E on keyboard) and click This PC using the left pane.
  • Right click on the target USB device and choose Format from the context menu.
  • The format window will appear. up on the screen. Here, all you have to do is make sure the file system is set to NTFS.
  • Click Start to format the USB drive. After the process is complete, try installing and running the media creation tool again.

    • Use disk management to convert to MBR

    The media creation tool requires that your USB drive be set to MBR (Master Boot Record) instead of GPT (GUID Partition Table). You can change this by following the steps below.

  • Press the Windows + R keys on your keyboard. This will bring up the Run utility.
  • Type “diskpart” without the quotes and press the Enter key on your keyboard.
  • When prompted by User Account Control (UAC), click Yes to allow the application to start.
  • First, enter the following command and press the Enter key on your keyboard to execute it: list disk.
  • You will see a list of disks connected to your computer. Type the following command and run it again: select disk #. Be sure to replace # with the disk number used to create the bootable media.
  • Then enter the following command and press the Enter key on your keyboard to execute it: clean
  • After clearing the data from the USB stick, enter the following command and press the Enter key on your keyboard to execute it: convert mbr

    • Temporarily disable your antivirus

    Antivirus applications are known to cause problems on computers, interfering with your Internet connection or blocking the proper functioning of applications and services. Many users have reported that software like F-Secure SENSE, McAfee, BitDefender or any other third party solution caused error 0x80042405-0xA001A in the Media Creation Tool.

  • Right-click on an empty space on the taskbar and choose Task Manager.
  • If Task Manager starts in compact mode, be sure to expand the details by clicking “Mode Details” button.
  • Switch to the startup tab using the header menu located at the top of the window.
  • Find your antivirus application in the list and select it by clicking on it once.
  • Click Disable button now visible at the bottom right of the window. This will disable the application from launching when you start the device.
  • Restart your computer and try using the Windows 10 Media Creation Tool again.

    • Disable USB selective suspend setting

  • Press the Windows + R keys using the on-screen keyboard to bring up up the Run utility, type “control” and click the OK button button. This will open the Control Panel.
  • Make sure the View Mode is set to Category and click on the Hardware and Sound heading.
  • Click the Change when computer goes to sleep link in the Power Options section.
  • Click the Change advanced power settings link. A new window should appear. up on the screen.
  • Scroll down and expand the USB settings section by clicking the + icon. Then expand the USB selective suspend setting and choose Disabled from the context menu.
  • Click Apply button and click OK to exit the window. Now try using the Windows 10 media creation tool and see if the error code 0x80042405-0xA001A has been fixed.

    • Final note

    I hope you like the guide Fix ‘0x80042405 error’ issue when using Windows 10 PC Media Creation Tool. In case if you have any query regards this article you may ask us. Also, please share your love by sharing this article with your friends.

    You Might Be Interested In
    Blogs DailyComputer GuidesComputers Tips and TutorialsguiderobertGuides and Tutorialsguiding12How To Guideinternet tips and tutorialsSoftware tips and tutorialsTipsTricksWindows 10Windows Tips
    Tech Desk

    Our editorial team manages this account. We provide Quality technical hacks and guides, Consumer Electronics comparisons, How-To tips, and tutorials with the latest updates.

    Leave a Comment

    * By using this form you agree with the storage and handling of your data by this website.

    You may also like

    How to Fix “Discord Error Code 1006” issue on Windows 11/10

    How to Fix “Helldivers 2 Quickplay Not Working” issue

    How to Fix “Helldivers 2 login limit reached” issue

    How to Fix “TikTok Picture Swipe Not Working” issue

    How to Fix “Network Adapter Error Code 31” issue on Windows 11/10

    How to Fix “Location Is Not Available” issue in Windows 11/10

    Where technology meets possibility" "Compsmag has Proudly Shared Free Information Since 2014.

    This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More