Table of Contents
This guide is about Fix ‘Disk Partition Not Recognized’ Issue In Windows 10. So read this free guide, Fix ‘Disk Partition Not Recognized’ Issue In Windows 10 step by step. If you have query related to same article you may contact us.
Fix ‘Disk Partition Not Recognized’ Issue In Windows 10 – Guide
If you connect an internal hard drive (HDD), solid state drive (SSD), or external drive, Windows should automatically configure it up for you. Unfortunately, this does not always happen and sometimes even the existing drive disappears from the system. Anyway, many issues can prevent the hard drive from showing up on Windows 10. If your hard drive doesn’t show up on Windows, there are several troubleshooting steps you can take. Sometimes when you connect an external hard drive to your computer, you find that it doesn’t show up. External hard drive does not appear up problem is common on Windows PC or Mac and can lead to data loss.
If the hard disk partition is not recognized or not displayed up on Windows 11/10, don’t worry. On this page, we have collected three main hard drive partitions not showing or recognizing Windows not showing or recognizing problems, listing the causes of these problems and offering corresponding solutions to help you display and function normally again. After upgrading from Windows 7 to Windows 10, the F: partition disappeared and appeared as “unallocated” in Disk Management and the contents became inaccessible. How did this error occur? Is there any way to fix hard drive partition not recognized by Windows 10?”
Fix Unrecognized Disk Partition in Windows 10
Flip to a different USB port or computer
USB drive does not appear up Windows 10 can also occur when the power supply from a USB port is not enough. In this case, I advise you not to use USB hubs because some of them are not able to supply enough power to the external hard drive.
Check and fix the drive in disk management
Sometimes an external hard drive that doesn’t show up on my computer (Windows Explorer) can show up in Disk Management. How to Open Disk Management:
What prevents a drive from showing up:
Create a new volume
initialize disk
set online
Change drive letter and paths
Another way to show unrecognized or undetectable WD external hard drive (WD Elements) up on your PC is to change the drive letter.
Run the troubleshooter
For USB devices not recognized in Windows, there is a handy tool to help: Hardware and Device Troubleshooter. How to Run the Hardware and Device Troubleshooter
Reinstall USB drivers
Also, you must open Device Manager using the above method or any other ways you like. Then complete the following steps. How to Uninstall the USB driver
Enable legacy USB support
Sometimes you may find that your hard drive is not detected in the BIOS. This could be caused by USB Legacy Support disabled. How to Enable USB support
Final note
I hope you like the guide Fix ‘Disk Partition Not Recognized’ Issue In Windows 10. In case if you have any query regards this article you may ask us. Also, please share your love by sharing this article with your friends.