56
Download the unofficial Windows 11 media creation tool from Github.
Extract the zip and run MediaCreationTool.bat.
Choose 11 as the MCT version.
Select Create ISO or Create USB.
Click Yes at the PowerShell prompt.
Choose the media (USB or ISO) and then the file location.
Click Next and you will get an installation media.
Now boot from your newly created media and you can install Windows 11 without meeting the system requirements.
First, go to this link and download the universal media creation tool zip file.
Extract the zip file and run the MediaCreationTool batch file. If Windows signals that it’s dangerous, don’t worry. Just click Run Anyway to continue.
Now when the program opens, choose 11 (at the bottom) as the MCT version.
Then choose Create ISO or Create USB. If you want to create a bootable Windows 11 USB to install on another PC, select Create USB. If you want to install it on a virtual machine, choose Create ISO.
If prompted, click Yes to allow Windows PowerShell to launch the media creation utility. will open up and you will see it titled “Installing Windows 10”. Just ignore it! You will create a Windows 11 media.
In the media creation tool window, choose the media you want to use. Select a USB flash drive or ISO file.
Now select the drive letter for the USB flash drive or the file location for the ISO file. Click Next.
The tool will start downloading Windows 11 from the servers and create installation media for you. And again, don’t get confused by what he says. You might see “Downloading Windows 10”, but don’t worry. you will end up with Windows 11.
Once the installation media has been successfully created, just boot from it as usual. You should be able to install Windows 11 without having a TPM on your system.
If your system has TPM 1.2 instead of TPM 2.0 and/or has an unsupported CPU and meets all other requirements, everything will become much easier. To work around this issue, we have a simple workaround that uses a registry hack to bypass CPU and TPM version checks. First, open Windows Registry Editor. Press Windows key + R, type “regedit” and press Enter.
Now copy and paste the following path address into the registry address bar as shown in the screenshot. HKEY_LOCAL_MACHINE SYSTEM Setup MoSetup
Right-click on a blank space in the right pane and choose New > DWORD Value (32-bit). Name it AllowUpgradesWithUnsupportedTPMOrCPU.
Double-click it to set the value data to 1 and click OK. Make sure ‘Hexadecimal’ is already selected as the base, as shown in the image below.
Now, if you find this too technical or feel uncomfortable editing the registry, you can do this with just a few clicks. Just download our custom log files and double-click the one you need to complete the job. If prompted, confirm the action by clicking Yes.
The above zip file contains some registry files in which Enable Win11 Upgrade.reg will hack the registry and Undo Enable Win11 Upgrade.reg will revert registry edits back to normal state. To change the registry, restart your PC and continue with the next step.
Download the Official Windows 11 Installation Wizard and launch it to start upgrading your PC to Windows 11. If prompted, agree to the prompts.
Firstly, you need to download the Windows 11 ISO file of the latest built-in preview version. Go to the link provided to get a super fast download link straight from Google Drive.
The next step is to create a bootable Windows 11 USB with a media creation tool. Access the link and see our guide to create one with Rufus.
Once you have a working Windows 11 USB bootable, you will need to restart your PC and boot it from the USB you just created with Rufus.
When restarting the PC, enter the BIOS using the BIOS key (depends on your PC make and model). In our case, it’s F2.
In BIOS, enable Boot from USB option and save and exit to boot from Windows 11 bootable USB flash drive.
After booting from USB, you will see a message saying “This PC does not run Windows 11” as below.
On this screen, click on the back button in the upper left corner. Next you need to open the Command Prompt window by pressing Shift + F10.
In the command prompt window, type regedit and press Enter to launch the Windows registry editor.
Navigate to the HKEY_LOCAL_M path
ACHINE SYSTEM Setup.
Click Edit > New > Key to create a new key called LabConfig.
Within LabConfig, right-click on a blank space and click New > DWORD Value (32-bit).
Then name it BypassTPMCheck.
Right click on it and select the Modify… option to edit the DWORD value.
Now assign it the value 00000001 and click OK.
Likewise, you need to create another DWORD value to bypass the Windows 11 secure boot requirement. To do this, create a new one and name it BypassSecureBootCheck. Then, as we did above, assign it the value 00000001 and click OK. You now have two DWORD values inside the LabConfig key. And the screenshot will look like this:
Now close the registry and command prompt windows and go back to the install prompt screen like this.
Again click Install Now button to start the installation process. This time, you will successfully bypass the Windows 11 TPM and Safe Boot requirements to install the OS on your incompatible or ineligible PC. Now you can proceed with the normal installation process without any problems. In the next window it will ask you to enter the activation key. You can skip it by clicking I don’t have a product key.
Once you click on this button, you will be taken to the next screen, where you will have to select the edition of Windows 11 you want to install on your PC.
On the next screen, accept the Microsoft license terms and click Next.
This will immediately start the installation process and you’re done!
Once this is done, your system will reboot and you will boot into the new Windows 11 operating system, as in the screenshot below.
Go to the Windows 11 ISO image folder and right click to select Mount.
Now select all files in the folder and copy them.
Create a new folder on any of your drives. Here, I created a folder called “Windows 11” on my F: drive. Paste the copied files into this folder.
Now go to the folder where you saved the Windows 10 ISO file. Right click on the file and select Mount. Then open the fonts folder there.
Find the DLL file called appraiserres.dll and copy it. If you don’t have the Windows 10 ISO, click here to download the specified dll file.
Extract the downloaded zip file and copy the dll file.
After copying the dll file, go back to the Windows 11 folder you created on the F: drive. Open the source folder, right-click and select Paste from the menu. Alternatively, you can simply press Crtl + V to paste the copied file.
When prompted to choose the pasting method, choose Replace file in destination. (This is very important)
Now go to the Windows 11 folder and double click the setup.exe file.
Select the option (recommended) to get drivers and updates.
It will then ask you to accept the license terms. Click on accept button in the background.
This will download updates immediately and take a while depending on your internet speed and system.
Once complete, your PC will be ready to install the operating system and installation details will be presented. Click here on the Install button button.
Windows 11 installation will start now and will take a few minutes to complete.
Your PC may reboot several times. Once the installation has completed successfully, you will be taken to the Windows login screen after the final restart.
Table of Contents
This tip is about the how to Create bootable USB drive with no TPM and no Secure Boot for Windows 11. So read this free guide, How to Create bootable USB drive with no TPM and no Secure Boot for Windows 11 step by step. If you have query related to same article you may contact us.
How to Create bootable USB drive with no TPM and no Secure Boot for Windows 11 – Guide
Need to install Windows 11 in a legacy BIOS without secure boot and TPM? All things considered, here is a workaround that works 100%. The energy level of introducing another Windows operating system remains, and most of us have had the joy of trying it out on different occasions. Nevertheless, the fervor is gone forever when you make a mistake for a problem that simply cannot be excused as insane.
One of the problems with installing Windows 11 is that it requires ‘Secure Boot’ along with ‘TPM 2.0’ enabled on a machine, and it’s a really straight loop to enable both options, assuming you’re in ‘UEFI BIOS Mode ‘. In any case, in a ‘Heritage BIOS Mode’, it’s an alternate game off and on.
How to Clean install of Windows 11 without TPM
How to Install Windows 11 with TPM 1.2 and/or unsupported CPUs
Steps to install Windows 11 without TPM
Download the Windows 11 ISO file
Create a bootable Windows 11 USB
Modify Windows Registry
Alternative method: Create custom installation media
This method of circumventing the TPM and safe boot requirements involves modifying the original Windows 11 ISO file. By this method, you can update the operating system by running the configuration file directly from the disk image. For the following to do it.
Final note
I hope you like the guide How to Create bootable USB drive with no TPM and no Secure Boot for Windows 11. In case if you have any query regards this article you may ask us. Also, please share your love by sharing this article with your friends.