Table of Contents
This tip is about the how to Eliminate WiFi Deadspots. So read this free guide, How to Eliminate WiFi Deadspots step by step. If you have query related to same article you may contact us.
How to Eliminate WiFi Deadspots – Guide
Anything that interferes with Wi-Fi radio waves can create a dead end. If you have a large building or office and you have your Wi-Fi router/hotspot in one corner of the building, there may be a dead spot in the opposite corner of the building that the Wi-Fi signal cannot reach. Most buildings were built before the development of Wi-Fi, so they can be constructed in a way that interferes with Wi-Fi.
Older buildings may have thick plaster walls that contain wire for support, and this metal wiring can block Wi-Fi signals. Large metal objects such as file cabinets or metal walls can also block Wi-Fi signals. Anything that interferes with Wi-Fi radio waves can produce a dead end. If you have a large building or office and you have your wireless access point/router in one corner of the building, there may be a dead spot in the opposite corner of the building where the Wi-Fi signal cannot reach. In this article we will show you how to Eliminate WiFi dead spots.
How to Eliminate WiFi dead spots
Update your router software
First, update the router’s “firmware” (the software that operates your router). Find the latest firmware on the manufacturer’s website. You can often resolve connection and speed issues by simply installing the latest firmware version. Consult your owner’s manual to learn how to obtain and install the firmware.
Change the channel
Most modern routers are dual-band routers, which means they can send WiFi networks that operate on two channels: 2.4GHz and 5GHz. Think of these channels as a two-way street: sending information to devices and receiving data back. The more people and devices use the road, the more traffic decreases. The same goes for WiFi channels. If your neighbors’ routers use the same channel as yours, both can become a trace. In this case, it may be useful to change the channel.
If your dual-band router is configured up correctly, it must broadcast networks on 2.4GHz and 5GHz channels. The 5GHz channel is less busy, so it should be virtually traffic-free and much faster than the 2.4GHz. Switch to the 5GHz channel and test your internet speed to see if it’s faster.
change the router
If your router is in a corner room, you can improve speed and reception by placing it in a central location. The signal can be affected by layers of drywall, brick or other materials. Since rewiring is a lot of work, try connecting the router to a central location with temporary wiring first to see if the signal strength improves.
Unplug the modem/router from its current location and run a longer Ethernet cable to a central location on your home. Then connect the modem and router to the temporary cable and recheck the signal strength in all rooms. Turn on WLAN on your smartphone, tablet or laptop, walk from room to room and observe the number of WLAN bars (not phone bars).
To define Up a WiFi range extender
Range extenders receive the signal from the router and rebroadcast it so you get coverage over a wider area. They are available in different speeds and powers. Two examples are the NETGEAR EX6200 High Power WiFi Range Extender and the NETGEAR EX6100 WiFi Range Extender, both available through our affiliation with Amazon.com.
Install a desktop range extender or wall plug-in midway between the WiFi router and the weak/dead area. Access the extender with your laptop and program it with your router’s password. Plug the extender into a standard receptacle and follow the programming instructions to make it work with your existing router.
Final note
I hope you like the guide How to Eliminate WiFi Deadspots. In case if you have any query regards this article you may ask us. Also, please share your love by sharing this article with your friends.