Table of Contents
Apple has acknowledged that some Apple Watch Series 6 models have a very serious problem that can cause the screens to stay blank forever. The company has agreed to fix devices for free that are affected. Different Apple Watch models, including the Series 2, Series 3, and Series 5, have sometimes had the same problem, which is called the “Black Screen of Death.” But in the second half of last year, there were more complaints about the Series 6, and Apple has now admitted there is a problem while trying to stress that only a “very small percentage” of devices are affected.
Your Apple Watch might have a black screen because the battery may be completely dead and it needs to charge until it has enough power to turn on. So, connect your Apple Watch to the charger that came with it and let it charge for about 30 minutes. On the watch’s screen, there should be a sign that it is charging.
Apple Inc. came out with the Apple Watch, a smartwatch, in 2015. It is made of black anodized aluminum and has a square body with round corners and a flat bottom. The watch has a 1.5-inch (38 mm) OLED display with a sapphire crystal cover. You can use the screen or the Digital Crown on the side of the watch to control the watch. The watch is powered by an S1 system-on-a-chip that was made just for it, and it has 8 GB of storage built in. It works with iPhone or later models running iOS 8.2 or later and can be used to make calls, send texts, check notifications, track fitness activity, and more.
Ways to Fix Apple Watch Black Screen Issue
Factory reset Apple Watch
- On your iPhone, launch the Apple Watch app. Next, you just need to select the “My Watch” tab.
- At this stage, you just need to click the General icon on the next menu.
- Select Erase Apple Watch Content and Settings after selecting the Reset icon. Next, you may be asked to enter your passcode to confirm the action you are working on.
Force restart Apple Watch
If you get the “black screen of death” on your Apple Watch, the first thing you should try is to force restart it. This could help your Apple Watch fix the software problems that could be the main cause of all the trouble you’ve been having. Here’s how to restart your Apple Watch by hand.
- Search the Apple Watch’s Side and Digital Crown buttons before doing anything else.
- Now, you need to press and hold both the Side button icon and the Digital button icon for a while. When you see the Apple logo, you can let go of the button.
- It will take a few seconds for your Apple Watch to start up again. Next, you need to see if the Apple Watch’s black screen is facing away or not.
Charge Your Watch
This seems like a no-brainer, but if you let your Apple Watch’s battery die, it can take a long time for anything to show up on the screen, and even then, it will take a lot longer to fully charge. If your watch has a black screen but still shows the time and battery life when you press a button, it is in Power Reserve mode. This mode turns off things like Bluetooth and Wi-Fi. To get it to work normally again, you’ll have to charge it. When the battery on an Apple Watch with watchOS 9 or later gets low, it doesn’t switch to Power Reserve mode. Instead, they use a new Low Power mode that has a lot more features than the old one. In either case, letting your Watch charge should put things back to normal.
A Worn-Out Battery
This seems like a no-brainer, but if you let your Apple Watch’s battery die, it can take a long time for anything to show up on the screen, and even then, it will take a lot longer to fully charge. If your watch has a black screen but still shows the time and battery life when you press a button, it is in Power Reserve mode. This mode turns off things like Bluetooth and Wi-Fi. To get it to work normally again, you’ll have to charge it. When the battery on an Apple Watch with watchOS 9 or later gets low, it doesn’t switch to Power Reserve mode. Instead, they use a new Low Power mode that has a lot more features than the old one. In either case, letting your Watch charge should put things back to normal.
What Causes Apple Watch Black Screen Issue
As we’ve already talked about, the so-called “black screen of death” problem in electronics and smartwatches can be caused by a software error or damage to the hardware. If your watch was working fine before and then suddenly got stuck on black, it’s more likely that the problem was caused by software.
Common software problems that can cause a device to get stuck on the “black screen” include, but are not limited to, bugs after an update, corrupted data, messed up settings, rogue apps, software bugs, and malware from downloaded content. If, on the other hand, your watch gets stuck on a black screen after you drop it or get it wet, it’s more likely that some of the parts are broken because of the physical or liquid damage.
Final Words
That’s it with our article on How to Fix Apple Watch Black Screen Issue. The screen on your Apple Watch may go black, which can be annoying. If this happens, you won’t be able to use your Apple Watch because it won’t do anything and the screen won’t show anything. Go to their official website to find out more.