How to Fix Input Signal Out of Range Error in Windows

A long time ago, computer monitors, which were usually VGA, weren’t very flexible. You had to buy a screen with the right resolution and refresh rate for your video card. You could change the resolution and refresh rate of video cards, which gave them a little more flexibility. If the signal from your video card wasn’t right, “Input Signal Out of Range” would show up on the monitor. In some cases, the monitor would also tell you what resolution and refresh rate to set your video card output to.

When you use your monitor as an external screen for your laptop or gaming console, you may see the message “Input Signal Out of Range” on the screen. Some Intel users have also seen this error when they tried to reinstall their graphics drivers. Most of the time, this happens because the monitor doesn’t understand the signals that the video adapters send. It could also be caused by corrupted device drivers or broken hardware.

This makes troubleshooting this problem much easier. Newer monitors, like LCD screens, don’t have this problem anymore because they automatically fix input signal problems by scanning all possible resolutions and refresh rates until they find one that works with the video signal from your video card.

4 Ways to Fix Input Signal Out of Range Error in Windows

Change resolution in Safe Mode

1. Press Win+I to open the Windows settings.
2. Go to System > Display.
3. Select the defective monitor.
4. Go to the Display Resolutions section.
5. Select the correct resolution from the drop-down list.

Lower the Refresh Rate on Your Monitor

1. Press Win + I to open the settings.
2. On the System tab, scroll down and click Display.
3. Scroll down to the Related Settings section and click Advanced Display.
4. Click the Select Display drop-down list to view or change the settings and select your display. If you only want to set up one monitor, simply proceed to the next step.
5. Then, under Display Information, click Display Adapter Properties for Display X.
6. In the Properties dialog box, open the Monitor tab.
7. Click the Screen refresh rate drop-down list and select 60 Hertz.
8. Click Apply and OK to save the change.
9. Alternatively, under Display Information, click the Select Refresh Rate drop-down menu and select 60 Hz.
10. Click Keep Changes to confirm the action.

Change Your Monitor Resolution to Its Windows Recommended Setting

1. Press Win + I to open the settings.
2. On the System tab, scroll down and click Display.
3. Then scroll down to the Scaling & Layout section.
4. Click the Display Resolution drop–down menu and select the Recommended option.
5. In Windows 10, go to System > Display and set the display resolution.
6. Once you set the correct display resolution, your external monitor will receive the signal and fix the error.

Uninstall or Update Current Graphics Drivers

1. Select the Start button once your PC has booted in Safe Mode. If you want to try to update the drivers, you should start in Safe Mode with Networking. Type Device Manager and select it from the list of results.
2. Select the Start button once your PC has booted in Safe Mode. If you are trying to update the drivers, you should start in Safe Mode with Networking. Type Device Manager and select it from the list of results.
3. Select Automatically check for updated driver software and follow the on-screen instructions to install it.
4. Restart your computer in normal mode and check if the problem is solved. If you uninstalled the driver, Windows should check for it and install it when you boot up.

What is the Cause of Input Signal Out of Range on Windows

If the graphics card doesn’t match the resolution of the monitor, this message will show up on the screen. If they don’t match, this error will show up. It doesn’t matter if you are using Windows 11, Windows 10, or an older version of Windows.Let’s say that the graphics card you are using has a higher resolution than the monitor. In this case, the error will happen. The monitor will stop working, but you will still be able to use the keyboard and mouse. It usually happens when you connect an old monitor to a new system or a new monitor to an old system. The monitor doesn’t work right. you can visit Microsoft support center for further help.

Final Words

So here we conclude our article on How to Fix Input Signal Out of Range Error in Windows. If your monitor gives you an error message that says “input signal out of range,” it means that your monitor isn’t getting the signal. It could be caused by a hardware problem, like a broken monitor or video card. If the monitor is broken, you will have to get a new one. The error can also happen if the refresh rate of the monitor and the frame rate of the video don’t match up. If the monitor refreshes the screen more often than the monitor can handle, you’ll see the error message. You can fix the problem by changing the size of the screen.