How to Fix PS4 Error Code NW-31295-0

198

The PlayStation 4 has ruled the gaming industry for quite some time now as an epic gaming console. Even after the release of the PlayStation 5, it continues to be the first choice of a large number of gamers. Despite the PlayStation 4’s enormous popularity, many die-hard players have reported encountering the error code NW-31295-0. This problem is usually encountered when attempting to connect to a Wi-Fi network. The error code NW-31295-0 is commonly encountered when attempting to connect to a Wi-Fi network and your PS5  won’t connect to Wi-Fi.

The primary cause of this error is said to be an inconsistent or weak Wi-Fi network. However, there are a number of other possibilities that could be the root cause of this error. Those who had a wired LAN connection never complained about experiencing the same problem. As a result, you can say that this problem is limited to Wi-Fi networks. Because the vast majority of PlayStation gamers use Wi-Fi rather than LAN connections, this error is extremely inconvenient for them.

Ways to Fix PS4 Error Code NW-31295-0

Reset or reboot your router

Steps to reboot your device:

On the back of your router, look for the ON/OFF button. To turn off the power, press the OFF button.

Then, disconnect the power cable to completely drain the power capacitors and clear any temporary data that may have accumulated between router restarts.

Reconnect the power cable to your router after one minute. Start your router, and once the internet connection is operational, look for the error NW-31295-0.

Steps to reset your device:

Locate the router reset button on the back of your router. On some models, the router reset button is built in and can only be reached with a small screwdriver.

Press and hold the reset button. Hold it down for 10 seconds until all the LEDs flash at the same time.

After resetting your router, enter your ISP credentials (if needed) and wait for the internet connection to be restored.

Try to connect your PS4 and check if there is any error.

Fix the PlayStation Network

If the error persists even after you reboot and reset your router, you should investigate a server problem. Navigate to the PSN Status Page. Check each status subcategory thoroughly. Check to see if Sony has reported any current issues with the Account Management function or the PlayStation Store. If you discover a server problem, you must wait for Sony to resolve the issue on their end. In this case, you are unable to resolve the error code NW-31205-1. However, if you do not encounter any server issues, proceed to the next method to resolve the error.

Keep your console closer to your router

As previously stated, the error code NW-31205-1 is caused by insufficient Wi-Fi. As a result, when you see the error message, move your console closer to your router. You can also keep your router in a location where you frequently play with your PS4. If you are unable to relocate your router, you can use a Wi-Fi expander tool to improve the signal strength of your Wi-Fi network. If this method did not work for you.

Change your DNS to Google DNS

It is possible that the ISP of your home network has been assigned to a bad DNS (Domain Name System). This bad DNS could affect your PS4 and cause error code NW-31205-1. To fix this issue, you should follow the steps below and change your default DNS range with Google DNS.

Swipe up on your PS4 console to select the Settings option from the horizontal menu.

From the Settings menu, switch to the Network menu.

Select the Internet Connection Setup option and click “X” to reconfigure your PS4 console’s Internet connection.

When the first network configuration screen appears, select the Wireless option.

Then select the Custom option so that you can change the DNS range.

Now click on the IP address and select the Automatic option so you can get to the DHCP hostname.

When prompted to configure your DHCP hostname, click the Do not specify option.

Now you will be redirected to the DNS settings. Set the settings to Manual.

Change the entries as indicated below:

Primary DNS – 8.8.8.8

Secondary DNS – 8.8.4.4

After changing the range to Google’s range, check if the error reappears in your console.

Connect to 2.4 GHz Wireless Network

This method applies to PS4 Vanilla users. The PS4 vanilla is only compatible with 2.4 GHz connections. When you connect your PS4 vanilla to a 5.0 GHz wireless network, it fails to connect the wireless frequency, resulting in the error code NW-31205-1. In this case, you can easily resolve the error by connecting your PS4 vanilla to a 2.4GHz network. To avoid this issue, use a dual-band router that supports both 2.4 and 5.0 GHz connections.

Some router models require you to change the type of wireless network in the settings. Restart your router and console after you’ve made the changes. Check to see if the error has been resolved. The PlayStation 4 is popular among gamers. However, when a connection error occurs, such as the error code NW-31205-1, it can be inconvenient for users. Because the error only affects Wi-Fi networks, you can avoid it by switching to a wired connection.

Final Words

We hope like our article on How to Fix PS4 Error Code NW-31295-0. This is a very frustrating error code NW-31295-0 because you have done everything correctly but your PS4 still cannot connect to Wi-Fi. However, you have already verified that the Wi-Fi is operational on other devices (Phone, Laptops, Computer). Furthermore, all other devices can easily connect to the router. If the error persists, you can visit PlayStation support center for further help.