How to Fix Windows 11 Installation Error 0x80246001

193

This tip is about the how to Fix Windows 11 Installation Error 0x80246001. So read this free guide, How to Fix Windows 11 Installation Error 0x80246001 step by step. If you have query related to same article you may contact us.

How to Fix Windows 11 Installation Error 0x80246001 – Guide

When using the Windows Update service, users may see error number 0x800f0831. This is not good to see as it indicates that none of the cumulative, security or other updates can be deployed correctly. This issue was most recently seen when customers tried to download update KB5012599 for Windows 10/11. In addition to 0x800f0831, there are hundreds of other Windows Update issues (e.g. 0x80070103, 0x80073712, or 0x80070541), but most of them are simple to fix. They are usually caused by the Windows Store cache, an unavailable Windows Update service, antivirus software, or corrupt update files.

How to Fix Windows 11 Installation Error 0x80246001

To resolve error code 0x80246001 when installing Windows 10 updates, use the following workarounds.

Check network connectivity

If you often run Windows 10 updates online, then a bad internet connection can cause this issue. So, before proceeding to the solutions, check whether you are getting proper network connectivity or not. To do this, open the Windows Console as Admin and run a single code as discussed below.

Go to Start and type Command Prompt. Right click on the top result and select Run as administrator.

If the UAC window prompts you, tap Yes. At the elevated prompt, run the following code.

ping google.com

Now check the report on missing data. This should come (0%) suggesting no loss of fixation.

Temporarily disable Windows Firewall

Although Windows Firewall protects the system from any malware attack, it can even prevent Windows from updating. Therefore, we suggest temporarily disabling Windows Firewall and installing the latest patches. Here it is how to Continue.

Press the Win and R keys together to launch the Run dialog box. Type Control Panel in the text box and press Enter.

Click on Windows Defender Firewall then “Turn Windows Defender Firewall on or off on the next screen.

Here, check the “Turn off Windows Defender Firewall (not recommended)” checkbox in the Private and Public Network Settings section.

Click OK to save changes and restart your computer.

Free up more space using clean garbage file

Lack of disk space can also lead to installation issue 0x80246001. So, you should check your computer for unnecessary files and delete them (if any). To do this, use the Disk Cleanup tool as discussed below.

Press the Win and S keys together to launch the search bar. In the text area, type Disk Cleanup and click on the top result.

Select the root drive (C:) in the pop-upup menu and tap OK. The system will start calculating the spaces it can free up.

Check all the checkboxes in the Files to Delete section except Download.

Click on “Clean up system files”, select the root drive (C:) and click OK.

Once again, restart your PC and check whether the error 0x80246001 reoccurs or not. If yes, try the next solution.

Run the update troubleshooter

If the error persists even afterward, we suggest you to run Microsoft’s built-in application i.e. Update Troubleshooter. Here are the essential steps to work with.

Press the Win shortcut and X to launch the Power menu.

Select Settings then Update & Security on the next screen. Choose Troubleshoot in the left pane and go to the right side.

Now scroll down a bit and click to expand Windows Update.

Click Run the troubleshooter button and wait until it’s over.

Finally, restart your PC for the recent changes to take effect.

Reset update components

Faulty upgrade components can block a fresh install and result in the “error 0x80246001” failure message. In such cases, you must reset the update components using the procedure below.

Press Win & R to invoke the Run dialog box.

Type cmd in empty, hold Ctrl+Shift and press Enter to launch Command Prompt as Admin.

When the UAC window prompts you, tap Yes to authorize access.

Now run the following codes one after the other. Be sure to press the Enter key after each command.

network stop bits

net stop wuauserv

net stop appsvc

net stop cryptsvc

The codes above will stop some of the essential services, now run the codes below to rename certain services.

rmdir %systemroot%SoftwareDistribution

/S /Q rmdir %systemroot%system32catroot2 /S /Q

Afterwards, configure your network connectivity using the following commands –

netsh winsock reset

netsh winsock reset proxy

After successfully executing the above codes, restart the services you previously stopped.

net start bits

net start wuauserv

net start appsvc

net start cryptsvc

Finally, restart your system and check whether the update error code 0x80246001 is resolved or not.

Download recent updates manually

If you are still unable to perform the Windows update, please visit the Update Catalog and download the standalone package (depending on your system architecture and OS build version). Now, follow these easy steps.

Open the official Microsoft website and enter the KB number in the search bar.

When the corresponding updates appear, choose your system architecture and click the Download button button.

In the next window, tap on the link and the download will start right after.

Please wait a while as it takes a few minutes to complete this task. Once again, open the Download folder and double-click the set-up File.

Final note

I hope you like the guide How to Fix Windows 11 Installation Error 0x80246001. In case if you have any query regards this article you may ask us. Also, please share your love by sharing this article with your friends.