Table of Contents
This tip is about the how to Fix ‘Computer Turns On But No Display’ Issue on Window 10 PC. So read this free guide, How to Fix ‘Computer Turns On But No Display’ Issue on Window 10 PC. If you have query related to same article you may contact us.
How to Fix ‘Computer Turns On But No Display’ Issue on Window 10 PC – Guide
In Windows 10, a black screen is one of the most difficult problems you can experience with your computer because it doesn’t provide an error code or message that you can use to determine the cause of the fix. Although a black screen can appear due to various things, it is usually related to graphics drivers or compatibility issues with a newer version of Windows 10. It can also happen when the device receives a system update with errors. Or it can end up being a hardware-related issue with the display, video adapter, or physical connection.
Whatever the reason, Windows 10 offers many ways to determine the cause and resolve this issue if you have desktop access or your system won’t even boot properly.
Force restart your computer
If all you see is a black screen after pressing the button button, try to press the power button for 10 seconds to force the PC to turn off and then back on. By doing this repeatedly three times, Windows Startup Repair should start automatically.
If nothing has happened after turning your PC on and off several times, it may indicate a hardware problem. read and see how to fix it.
If you boot into Auto Repair, select Troubleshoot > Advanced Options > Startup Settings > Restart > Safe Mode with Networking and skip to Fix 7 to see how to fix possible problems with your system.
Make sure your monitor is working
If your computer starts but doesn’t display anything, check that your monitor is working properly.
Check your monitor’s power light to make sure it’s turned on.
If the monitor does not turn on, unplug the power adapter from the monitor and plug it back in again. If the problem persists, you need to take the monitor in for repair.
If your monitor works fine, proceed to the fix below.
Reconnect the monitor to the computer
A bad connection between the monitor and the computer can also be the cause of the problem. In that case, reconnecting the two devices is most likely the solution to your problem. Here it is how to Knife:
Disconnect your peripherals
Sometimes certain peripherals connected to the computer can also cause the black screen issue. Try unplugging all peripherals to see if this is the main problem. Here it is how to Knife:
If your computer boots correctly, it means that one of the removed peripherals is causing the problem. You must reinstall each device back into your computer and test them each time. Then you will find the specific device causing the issue. (Replace the device after you identify it. Or consult the device manufacturer for help.)
Repair corrupted system files
The following steps require you to boot the system. If your PC still doesn’t boot normally, check our guide about how to boot your computer into safe mode.
If you can’t boot your computer properly or it crashes constantly, it could be a problem with your system files. There are two ways to run a system check to see if there are any broken or damaged system files causing the problem for you.
Repair corrupt files with reimage
Reimage is a powerful Windows repair tool that can scan your system file and replace corrupt or missing files automatically. It’s like a clean Windows reinstallation with one click and you won’t lose any programs, settings or data.
Run system file checker
System File Checker is a built-in Windows tool that can help you check and repair any corruptions of your system files.
Final note
I hope you like the guide How to Fix ‘Computer Turns On But No Display’ Issue on Window 10 PC. In case if you have any query regards this article you may ask us. Also, please share your love by sharing this article with your friends.