Gigabyte Aorus FI32U review 2024: great gaming monitors

The 144Hz 4k IPS screen on the Gigabyte AORUS FI32U makes it a great monitor. It’s one of the first monitors on the market that supports HDMI 2.1 and is made for gamers with next-gen consoles. gamers don’t have to settle because it also works with VESA’s Display Stream Compression (DSC) technology.

This means that as long as your card supports DSC, you can still get the most out of it even if you don’t have an HDMI cable 2.1 graphics card yet. This monitor’s fast refresh rate, low input lag, and great response time make it a great choice for gaming. It works with the FreeSync variable refresh rate technology to make gaming almost tear-free. It’s a great monitor for most uses when you’re not gaming. 

Gigabyte Aorus FI32U specifications

Gigabyte Aorus FV43U review: Design and Setup

The Aorus F132U is the type of gaming monitor that says “gaming monitor” even when it’s turned off, and when you turn it on, it pulls out a battery-powered bullhorn. So you better really want that. I think it’s a very nice monitor that only sometimes goes a little too far into gaudiness.

Not from the front, where its bezel and base show just a hint of conservatism with their sensible design and deep black colour, even though the sharply obtuse spread of the stand’s feet and the hint of a diamond-shaped opening below the screen show a lot more. You can get this gaming monitor from its official website.

Gigabyte Aorus FV43U review: Features

Like Aorus’s other new gaming monitors, this one has a lot of built-in gaming features. The Black Equalizer feature destroys the picture quality and contrast to help find enemies hiding in the shadows. This is useful because the screen only has a small range of brightness levels.

You can choose from different on-screen crosshairs, which can be helpful in games like Call of Duty where you only have iron sights and scopes. You can use Picture-in-Picture mode to play a game while watching a walkthrough video.

Gigabyte Aorus FV43U review: Display

As measured by our Klein K10-A colorimeter and DisplayCal software, it covered 127.9% of the sRGB colour gamut and 90.6% of the wider DCI-P3 colour gamut. Other modes do better—VS does the best with 141.1% for sRGB and 99.9% for DCI-P3—but they all do well.

The FI32U also shows these colours very accurately. Depending on the picture mode, its Delta-E (the number that shows the difference between the colour sent from the source and the colour shown on the screen, with a lower number being better) is usually between 0.17 and 0.25.

Gigabyte Aorus FV43U review: Image Quality

The Aorus FI32U was also the first monitor with a 31.5-inch IPS panel and the Eyesafe certification. This means that harmful low-blue lights are less likely to be emitted, even when a low-blue filter mode is not turned on, and that colour accuracy is not affected.

The high pixel density of 140 PPI makes the 4K UHD resolution look great on the monitor’s 31.5-inch screen (pixels per inch). You get clear text and details, as well as a lot of space on the screen. Some users don’t use any scaling here, but others might like 125% scaling to make small text easier to read.

Gigabyte Aorus FV43U review: Performance

It’s hard to use a full 4K resolution at 144Hz: you need a connection that’s not just DisplayPort 1.4, but also supports DSC. The problem is that this kind of connection is only available on powerful Nvidia RTX 20-series, AMD Ryzen 30-series, and Nvidia RTX 30-series graphics cards that are still hard to find. The two HDMI 2.1 ports will allow 120Hz refresh rates, which isn’t too much of a performance drop and is good for the newest consoles, which can’t go faster anyway.

Gigabyte Aorus FV43U review: Price and release date

The price of the Gigabyte Aorus FI32U is between $700 and $1,000. We suggest getting the M32U model instead. It’s the same monitor, but it has a different look and doesn’t have RGB lighting or ANC. It’s also $100–$200 cheaper than the FI32U.

If you want a 32-inch 4K 144Hz IPS monitor, we recommend the $1,000 LG 32GQ950 because it has better HDR support, a faster response time, and an A-TW polarizer that helps with IPS glow and perceived contrast ratio.

Final Words

The Gigabyte FI32U is a great monitor for gaming. It has a fast refresh rate, a great response time, and very little motion blur. It also supports HDMI 2.1, which makes it a great choice for gamers using next-generation consoles.

The large, high-resolution screen makes it easier to get into a game. It has a large viewing area and is comfortable to use, so you shouldn’t have any trouble playing games with other people. On the other hand, when gaming at 60Hz, it has a bit more input lag than usual.

FAQs

Is the Gigabyte M32U worth it?

Overall, the Gigabyte M32U is a great value for money 32-inch 4K 144Hz gaming monitor. Its IPS panel has bright colours, a wide viewing angle, and a fast response time. FreeSync up to 144Hz makes sure the performance is smooth, and there are many other features. 

Does the Aorus FI32U have speakers?

The Gigabyte Aorus FI32U also stands out when it comes to sound. The monitor doesn’t have speakers built in, but it does have an ESS Sabre Digital/Analog Convertor (DAC) chip.

Does Aorus FI32U support G Sync?

Through adaptive-sync, the FI32U can work with both AMD FreeSync and NVIDIA G-sync systems that have different refresh rates. It has been approved by AMD’s “FreeSync Premium Pro” programme, but not by NVIDIA’s “G-sync Compatible” programme.