Table of Contents
Today in this article we are going to show you how to connect to a serial console on Linux. Linux is an excellent operating system for use on unmanned sites. Furthermore, Linux is effective at hosting crucial network infrastructure such as DNS and DHCP services. Every location in an organization, including locations that may be too small or remote to have information technology employees, typically has these services installed.
A person can access a computer console or network device using the serial console, which is a connection through an RS-232 or serial port. A console is usually accessible through an SSH connection. However, it may be feasible to access the computer or device via a serial connection if there are software, hardware, or other access issues. The serial console is also the primary method for accessing the console on older computers and computers without peripherals (computers or gadgets without monitors). We have mentioned below the steps to connect to a serial console in Linux.
Steps to Connect to a Serial Console on Linux
To define Up USB to Serial Converter
Step 1: Almost any USB serial converter you can find on the market is automatically recognized by Linux???? Plug any USB converter into your computer and use the dmesg command to find out the device file name.
dmesg
Access authorization on serial devices
Step 1: The standard mounted USB converter access privileges device files are usually as follows:
ls -l /dev/ttyUSB0
# Outputcrw-rw—- 1 root dial 188, 46 Jul 17 15:34 /dev/ttyUSB0
Step 2: You are impossible to read or write to the USB serial converter if you are logged in as a regular user who is not a member of dial group???? You can add the current user to the dial group or change the udev rules files on your system to fix this issue.
Step 3: You can use the first technique for convenience. To start, use the id command to determine which groups your user belongs to:
I would
Step 4: Add your user to the group using the add user or usermod command:
sudo usermod -aG dialout USERNAME
dialing sudo adduser USERNAME
sudo usermod -a -G uucp USERNAME
Connect to Serial Consoles on Linux
You can use serial console programs to connect to a computer or network console. Typically, you need access via SSH to do this. However, it is also sometimes possible to access the console using simply serial ports from a software and hardware perspective. These types of examples are more common on older systems. The main serial console programs are listed below for your use.
Using Minicom
Step 1: You may install minicoman old app but still working on your system as follows:
sudo yum install minicom
sudo apt-get install minicom
sudo snap install minicom
Step 2: When you first launch the app, it will try to open a device file such as /dev/modem by default. It ends when it cannot find the file. To overcome this problem, you can directly launch the app settings screen with the -s parameter:
minicom -s
Step 3: You can set the device name by pressing the button ONE key and the speed of the serial port by pressing the key AND key. So when you go out with Exityou can use the corresponding serial port.
Step 4: Step 1: While on the app’s main screen, you can return to the configuration screen with Ctrl + A + Oexit the app with Ctrl + A + Xactivate the line wrap way with Ctrl + A + Wand get help with other shortcuts with Ctrl + A + Z????????
Using GTKTerm
Step 1: Minicom is typically used by experienced Linux users, so it is not suggested for new users. GTKTerm is a graphical serial terminal emulator for Linux that novice users can install. Using the following commands, you can install the application on your computer:
sudo dnf -y install gtkterm
sudo apt-get install gtkterm
yes -S gtkterm
Step 2: When starting the app, you will have to set the device name and speed parameters via the Configuration > Port menu as follows.
Step 3: Save settings as default for easier use later.
using the screen
Step 1: If you are familiar with the screen for multiseat management, you will know that you can also use it for serial port access. Here are the commands to install it:
sudo dnf -y installation screen
sudo apt-get -y installation screen
sudo snap installation screen – classic
Step 2: After installation, you can run a command like this to connect to a serial console:
screen /dev/ttyUSB0 115500
Final Words
We hope you like our article on how to connect to a serial console on Linux. Like other operating systems like Microsoft Windows, Apple Mac OS, iOS, Google Android, etc., Linux is an open source operating system. An operating system is software that enables communication between computer hardware and applications. It transports data for the processor to process and delivers the output to the hardware for display.