Table of Contents
This tip is about the how to fix ‘iPhone network coverage and hotspot’ Issue. So read this free guide, How to fix ‘iPhone network coverage and hotspot’ Issue step by step. If you have query related to same article you may contact us.
How to fix ‘iPhone network coverage and hotspot’ Issue – Guide
If you live in an area with weak cells phone reception, you may receive “No Service” message frequently. However, if the area doesn’t experience network issues, but you still don’t receive service on your iPhone, it could be an internal software issue. The iPhone “No Service” issue is becoming a common problem for many iPhone users especially those using a 2016 and 2018 iPhone 7.
It can be frustrating to not receive service on your device, even if you are in an area with good reception. You will not be able to send messages, access the Internet or call anyone when you need to. While there are ways to solve the iPhone “no reception” issue, it can still affect your productivity and prevent you from doing important tasks. Below are some signs you can use to tell if it’s really a network issue or if your phone is behaving strangely.
When you’re traveling or working on the road, it’s important that you stay connected. However, that doesn’t mean you have to rely on public Wi-Fi, which isn’t always secure. Instead, you can use your phone to share an Internet connection with your laptop, tablet and other devices, unless you are using your phone as a mobile access point does not work. Follow these steps to learn how to fix iPhone network coverage and hotspot issues.
How to fix ‘iPhone network coverage and hotspot’ problem
Activate airplane mode
Swipe down from the top right corner of the screen to open the Control Center and tap on the Airplane Mode icon, which may turn orange to indicate it’s on. This will disable all your Community, Wi-Fi and Bluetooth connections. Wait a minute and turn off airplane mode. This is usually all you need to do to get a better community signal.
Check service settings
This is so simple you can go ahead and try it out: Open Settings > General > About and if your service has updated its settings but your device still hasn’t, a message will pop up asking you to replace the service. If the message does not appear, your service settings are up so far and you can try the following method.
Restart your iPhone
If turning your mobile device on and off again in Airplane Mode does not improve the connection, try restarting your iPhone.
Restart an iPhone with a Home button: press and hold the Sleep/Wake button button until the slider appears and drag the slider to “Off”. Leave it off for a second, then press the sleep/wake button button to turn your device back on.
Resetting an iPhone FaceID: Press and hold the Sleep/Wake button button is the number Up or Number down buttons simultaneously until the slider appears. Wait about 30 seconds, then press the sleep/wake button button to turn the device back on.
Reset iPhone forcibly
To force restart an iPhone with Face ID, you need to press the crowd up buttonthen press the crowd down buttone finally press and hold the face button. keep pressing this button until a signal from Apple appears after the screen goes black briefly. For an iPhone with home The pressure reset button is triggered when you press and hold the button home and power buttons at the same time until the Apple brand appears.
Removing and replacing the SIM card
Do you carry the Apple-provided SIM card removal software on your keychain? Yes, because the software (a paper clip) will not always be there when you need it. If you find that you are struggling with bad community protection and none of the other attempts have done anything, try removing and replacing your SIM card. Just insert the SIM removal software until the tray pops out, examine the SIM to make sure it’s not broken, then reinsert it.
Resetting community settings
This method often fixes community protection issues and private hotspots. The reason you shouldn’t try it first is that resetting these settings means you’ll have to re-apply all your Wi-Fi and Bluetooth passwords, any custom APN settings, and VPN connections. Make sure you have the appropriate information to reactivate these providers if you decide to reset your community settings.
It’s simple:
Open “Settings > General > Transfer” or “Reset iPhone > Reset” and select “Reset Community Settings”. A warning message will appear and you need to tap Reset Settings. Your iPhone will restart and you’ll likely be pleasantly surprised (or not) at the improved connectivity.
How to troubleshoot private hotspots
If your service allows it, you should use the private hotspot on your iPhone to share your mobile reference with other devices. Many of us use this to get SIM-less Macs or iPads online when working outside of an office. The connection is made available to your other devices on the available Wi-Fi providers.
You can find the private hotspot in Settings > Personal Hotspot. It should be listed directly under Cellular Data on the first page of the Primary Settings webpage.
If you don’t see this option, your service doesn’t support it feature, or you will need to contact the service to add the option to your account. However, if you already know that the non-public hotspot should work on your iPhone and it doesn’t, try the next steps:
Check the obvious personal hotspot settings
At the risk of being obvious, open Settings > Personal Hotspot and make sure the “Allow others to join” checkbox is checked. If not, you’ve solved your problem and other devices should now see this community. While you’re checking for obvious issues, take a second to open the Control Panel and make sure Airplane Mode is turned on.
Check the much less obvious personal hotspot configuration
Open Settings > Personal Hotspot and look at the bottom of the webpage. There you should discover an item called Maximize Compatibility. If you enable this option, your devices will normally be able to make better use of the connection.
Turn Wi-Fi on and off again
If your personal hotspot is not displayed up as an option for the devices you want to connect with, try turning Wi-Fi off and on again on that device. This will usually encourage your Wi-Fi a little more to look for your hotspot.
Restart all your devices
That reboot sequence I discussed earlier? If you’ve come this far and Personal Hotspot is still not working, try restarting your iPhone and then restarting all the devices you want to use it to transfer online.
Try using a different connection
You can join your private hotspot in 3 ways:
Under most circumstances, you are probably using Wi-Fi. If this is not working correctly, try using one of many different connection strategies. You may have to put it in iTunes and sign in using your Apple ID if you’re using a Windows PC.
Resetting community settings
As mentioned earlier, the best option is to reset the community settings. It’s possible that your iPhone’s community settings need to be reset because they may have become damaged with regular use, so a reset should get your device like new again.
As mentioned earlier, this means you will need to re-apply all your Wi-Fi and Bluetooth passwords, any custom APN settings and VPN connections you are likely to use. Just follow the instructions given above.
Final note
I hope you like the guide How to fix ‘iPhone network coverage and hotspot’ Issue. In case if you have any query regards this article you may ask us. Also, please share your love by sharing this article with your friends.