Table of Contents
The article explains how to Fix missing device drivers in Windows. Drivers for Windows 11 hardware, which includes peripherals such as a mouse, keyboard, monitor, and just about anything else you connect to a computer, contain the instructions necessary for the system to communicate with and control hardware (such as a network adapter, video card, hard drive, etc.). Follow the steps are given below.
We’ll walk you through the process of finding and installing missing drivers on your Windows 11 computer. Small software packages known as drivers help your PC recognize the connected device. The latter will later be able to successfully perform its typical functions. Every device, including your smartphone, keyboard, headphones and mouse, has a corresponding driver. In this sense, when you connect some modern devices to your PC for the first time, some of them automatically install their drivers. However, a considerable part of the devices require manual installation of these drivers. And we’ll help you with just that in this guide. Here is the article to resolve missing device drivers in Windows.
6 Ways to Fix Missing Device Drivers in Windows 11
Switch to USB 2.0 port
Although USB 3.0 port offers faster read/write speed, however, in some environments such as Windows recovery or BIOS, your system may not be able to identify the device connected to this port. Therefore, it is recommended to connect your USB drive to the tried and true 2.0 port. So, try this tweak and see if it fixes Windows 11 error, no device driver found.
Use a standalone USB for drivers
Windows bundles all the necessary drivers along with the operating system, but as of now, the system is unable to unzip and install these drivers from the ISO file. So your next course of action should be to create a standalone bootable USB device, insert just the drivers and try to install the drivers for that secondary USB. See how:
Step 1: To get started, create a second bootable USB device using third-party software such as ruff.
Step 2: then download the SATA drivers corresponding to your chipset: AMD | Intel
Step 3: Now transfer the driver files to this second USB device.
Step 4: After that, start the installation using the main USB device that has the ISO file.
Step 5: once you play up The “no device driver found” error, plug in the second USB device that has the driver file.
Step 6: Now click OK to close the error message. Then click Browse, browse to the driver files present on the second USB device and click OK.
Step 7: The drivers will now be loaded and later installed. And with that, it should also fix no device driver found error in Windows 11.
Manually set the active partition
The problem can also be attributed to the system being unable to identify the active partition and therefore install the drivers. Therefore, you will have to manually inform him about the same so that he can proceed with the installation. See how:
Step 1: To get started, insert the bootable USB drive into your PC that has the ISO configuration file.
Step 2: Then restart your PC and restart the installation process. When you reach the Choose an option screen, click Troubleshoot.
Step 3: After that, click on Advanced Options followed by Command Prompt.
Step 4: Now run the following five commands (one at a time) in this CMD window. Be sure to replace X with the name of the disk and partition where you are installing the OS:
Step 5: Now that you have selected the desired partition, simply run the command below to make it active:
active
Step 6: Once that’s done, you can close the CMD window and proceed with the rest of the installation. See if it can fix the device drivers not found issue.
Enable xHCI transfer in BIOS
The extensible Host Controller Interface (xHCI) establishes guidelines for USB 3.0 controller hardware and software interaction. When enabled, the BIOS gives the operating system full authority to manage said ports. On the other hand, if you disable it, the BIOS has full control and the operating system has no say in handling and controlling the ports. In the current scenario, many users were able to succeed after granting authority to the operating system. In others words, they were able to fix the device driver issues by enabling XHCI transfer from the BIOS. So, let’s enable the Host Controller and check the results.
Step 1: Start by turning off your PC. Then turn it back on and once it is booting up continuously press the Esc key
Step 2: That should bring up The Boot menu. Press F10 to select the BIOS menu from there. Your PC will now boot into the BIOS.
Step 3: From there, go to the Advanced tab and scroll down to the USB configuration section.
Step 4: Now you should see the xHCI Hand-Off BIOS or EHCI Hand-OFF BIOS option, change its state to Enabled.
Step 5: Once this is done, save the changes and restart the installation process. Check whether the Windows 11 device driver error is not fixed or not.
Disable BIOS Secure Boot
Secure Boot is basically a security mechanism implemented by Microsoft that verifies the credibility of every driver being installed or loaded at boot time. However, in rare cases it can generate a false positive and also prevent the installation of legitimate drivers. The only way to verify and therefore fix this issue is to disable this security check (also known as Secure Boot).
Step 1: So start by initializing your PC to BIOS, as explained above.
Step 2: Then go to the Security tab and you will see the Safe Boot option. Change its state to Disabled and save the changes.
Step 3: However, if the Secure Boot option is not available, check it in the Boot/Authentication/System configuration section and disable it.
Step 4: Once done, restart your PC and you should get the Operating system boot mode change prompt. Type the requested code and press Enter to verify the changes made to the BIOS.
Step 5: Now proceed with the setup and check whether the Windows 11 no device driver found error is fixed or not.
Clean install of Windows 11
If none of the above mentioned methods could explain the success then it could be a case of bad sectors or corrupted data on your C drive. So the only way out is to perform a clean install of Windows 11 which will delete all the data in the process. So if you want to go this route, make a backup in advance and refer to the instructions below.
Step 1: Boot your device into Windows 11 setup via the bootable USB device that has the ISO file.
Step 2: Once you get to Windows Setup screen, press Shift + F10shortcut keys to open the Command prompt.
Step 3: Then run the two commands below in the CMD window to bring up the list of disk drive names
disk parts list disk
Step 4: After that, type the below command to select the partition where the operating system needs to be installed. Be sure to replace the X keyword properly:
select disk X
Step 5: Finally, run the command below to wipe the selected disk:
clean
Step 6: After formatting the drive, restart the installation procedure. This time, you shouldn’t have device driver issues.
Conclusion
Here they are final from our article how to fix missing device drivers in Windows 11/10. We completed our tutorial about how to identify and install missing drivers on a Windows 11 computer. In addition to describing the processes for performing a missing driver check, we offer three different installation techniques. The article is now complete and you know how to fix missing device drivers issue in Windows 10/11.